Jump to content
SAU Community

Recommended Posts

Hi guys,

I have my eye on a front cut from a 2000 stagea and would like some information regarding the difference between the RB25DETs in them and the ones found in R34s.

I have been told that because they are auto, they have less power. Is that just a simple tuning problem cos they're auto?? Or is there more to it??

How hard are they RB25DETs out of the stagea's to transplant into a manual R34?? I know that you need to change the sump and oil pickup, and that the loom is different. Can anyone expand on this?? Is there an easy way to get around these problems??

Thanks in advance,

Brett

Hey Brett,

The RB25det in the R34 Skyline is the NEO version, VVT type. I have a 97 mod staj with the r33 type 25 motor. The reason that they are not as quick is a simple weight issue. The Staj is a bit of a porker carrying 1650kg dry. How much is fcut?? Are you trying to change the R34 into a 4wd?? Big job!

Cheers m8,

Ken

The front cut also has the NEO version of the RB25DET. I am looking to transplant this into my RWD R34 and need to know of any hassles before hand, so that I can deal with them quickly and get my car on the road ASAP.

I know that to transform the cut from AWD to RWD, you need to change the sump and pickup, but other than that I have not been able to source any other information. Any ideas??

Anyone?? :confused:

  • 3 weeks later...

i have a stagea engine in my r33 gts4 and it is exactly the same as a rb25det, except that the sump you will have to change because of the 4wd drivetrain in the stageas',loom you can get away with the standard one because i think the stagea loom has the fwd linked into it. im actually taking my stagea engine out and selling it if you interested, because im putting a rb25det in so ill swap the sump myself... pm me if your interested

Thanks specialk,

I already have a stagea engine (Neo RB25DET) that is going in on Wednesday. Thanks for the info on the loom, too. I have heard that it shouldn't be a hard swap, but needed to know if there was any major differences i.e incompatible wiring harnesses etc.

What was your reason for swapping from the Stagea RB25DET to another RB25DET??

i work with boostd (the one who's car got written off) and we are throwing his engine into my car. just had more work done to it.

you are converting your car to RWD? or was his a 4wd rb25det as well?

as far as im aware, the 2wd sump will bolt onto the 4wd block, but not the reverse

Yes. Apparently the 2WD sump bolts onto the 4WD engine but not the other way around. I hope so cos I need to transform the stagea cut from 4WD to RWD.

Does anyone know what differences there are in the wiring harnesses for the stagea RB25DET and the R34?? As much info as possible would be great!!

the 2wd uses a different set of "bolt holes" in the block for attaching the sump

the 4wd block has 2 sets(to suit 4 and 2), the 2wd only has the holes it needs (i think)

Correct :D

  • 3 weeks later...

Seems like a waste of a perfectly good 4WD engine. They are hard enough to come by at the best of times , without ppl converting them to RWD only. I just transplanted one into my R32 GTS4, because it's the only upgrade (short of a 26).

Why not let some poor soul with a R33 GTS4 use it for his upgrade? You can use any RB25DET in a GTS / GTSt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sane enough. Remove the roof liner, because the acid will go everywhere.
    • Thanks guys, I really appreciate the help and experienced opinions.  I have spent a lot of my life working on boats so I'm pretty good with fibreglass. I'll take everybody's advice in here;  I'll cut a little more of the 2nd layer away as it's a bit crunchy rust and also it's sitting high now. Then I'll wire brush it all a bit to get off anything loose, then I'll soak the bejesus out of it all in rust converter. I'll make sure to get a little hose piece and feed it into all the holes and gaps between the roof layers. Then I'll fibreglass up the holes.  Then I'll get a pallet of filler and mix it with 3 buckets of hardener and hope that is enough to build up the roof corner.  Does that sound sane? Is one type of filler better than others for this?
    • My goals for it atm are to get it registered, respray and some mild power gains eventually... I picked up the car from an elderly gentleman near the border of NSW and VIC, its honestly a bit rough and looks like its been driven on a farm (because there was so much dirt underneath). Last week I dropped the subframe and emptied the old fuel out + added a new fuel pump (think the old one went bad from old fuel). Now I'm onto fixing a coolant leak at the rear of the engine + adding a new radiator as the old one is corroded. After that i have a new bumper, coils (as the old were leaking) and lots more
    • Welcome buddy! Plenty on here and YouTube. What are your plans for it? Good luck with the Rwc and Rego bud!
    • Love this so much! Please post a photo when you have a bike on the trailer.  I was a little bit worried about having a tow bar on the Skyline, but having it hidden behind the number plate is genius
×
×
  • Create New...