Jump to content
SAU Community

Hank's Brap Brap RX-8

Hank Scorpio

By Hank Scorpio,
in Motorsport Builds

 Share

Recommended Posts

Hank Scorpio Grand Master

Hank Scorpio

Posted
Posted

As many of you are aware for a few years now I've been bitten by the rotary bug, they're not for everyone but I love 'em!

So quite some time ago I purchased myself a JC Cosmo with a factory 20B in it, I had the motor built by local rotary gurus 'Rotomotion' (GT4202R, dowelled, bridgeported etc.) and it made a bunch of power which was great. 2 years ago at RaceWars 2014 my tailshaft let go and I destoryed the back of my gearbox, since then the Cosmo has not been driven :( The Cosmo was in pretty poor condition and the dream ever since has been to buy an RX-8, drop the 20B in and go racing, good chassis + good engine should mean a fast car!

So last Saturday I finally got my hands on a car I wanted in my budget, picked up an un-registered RX-8 roller and thus my first proper motorsport build has begun!

As you can see I purchased the car with no engine or box so that is alread taken care of for me, I now have the car in the corner of the workshop and I'll probably start stripping it down soon.

RX-8.jpg

engine bay.jpg

  • Like 3
Link to comment
https://www.sau.com.au/forums/topic/465765-hanks-brap-brap-rx-8/
Share on other sites
Hank Scorpio Grand Master

Hank Scorpio

Posted
  • Author
Posted
1 hour ago, r32-25t said:

I thought you were building a street car with it

Nope, un-rego'd shell.

Sure I might chuck the trade plates on it but ultimately I'd like to take it to the track.

Victory Mentor

Victory

Posted
Posted

Welcome to the RX8 family.

My daughter has had a Series II RX8 for the last two years and I have spent many hours during that period servicing and upgrading it.

Dimension wise it is very close to my R33 GTR in wheelbase and track. The front and rear brake disks are also the same size as the GTR.

They are a strange animal to drive with a 50/50 weight distribution compared to our nose heavy Skylines. Braking, turn in and mid corner grip is amazing it is just the lack of power to drive out of corners like a Skyline that they lack. The installation of a 20B would go a long way to fixing the lack of punch.

In the US there are a number of kits to install a LS series motor and box from the new Corvette into the RX8 - that really gives them some punch. The kits are that detailed that they run the Corvette ECU to run the engine and then splice all of the sensors back into the Mazda ECU to run the dash and all of the systems. A friend has done this conversion in a FD RX7 and it is that seamless of a conversion that it looks like it came that way from the factory.

Subscribed to your thread to follow your progress.

Hank Scorpio Grand Master

Hank Scorpio

Posted
  • Author
Posted
13 hours ago, Victory said:

Welcome to the RX8 family.

My daughter has had a Series II RX8 for the last two years and I have spent many hours during that period servicing and upgrading it.

Dimension wise it is very close to my R33 GTR in wheelbase and track. The front and rear brake disks are also the same size as the GTR.

They are a strange animal to drive with a 50/50 weight distribution compared to our nose heavy Skylines. Braking, turn in and mid corner grip is amazing it is just the lack of power to drive out of corners like a Skyline that they lack. The installation of a 20B would go a long way to fixing the lack of punch.

In the US there are a number of kits to install a LS series motor and box from the new Corvette into the RX8 - that really gives them some punch. The kits are that detailed that they run the Corvette ECU to run the engine and then splice all of the sensors back into the Mazda ECU to run the dash and all of the systems. A friend has done this conversion in a FD RX7 and it is that seamless of a conversion that it looks like it came that way from the factory.

Subscribed to your thread to follow your progress.

Thanks Charles, from the Gong as well!

One of the reasons I wanted the RX-8 was because it has a great chassis. It's a fair bit more modern in design than an FC or an FD (or say a Skyline), lots of available aftermarket parts as they were sold locally in Japan, Australia and the USA and it should be made to be really good around corners. A nice set of coilovers, swaybars, strut braces, underbody bracing and eventually a cage should make it turn on a dime.

Luckily for me I have the ECU, wiring and Microtech out of the Cosmo, between that and what's left in the RX-8 I don't imagine it will be too difficult (in the scheme of things) to get everything running nice. And putting a rotary into a car which already had a rotary in it obviously makes things a bit simpler again.

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • MBS206
      R32 gtr transmission strength, billet plate

      By MBS206 · Posted

      What are you thinking makes a sequential shit to drive on the street? About the ONLY thing I can think of, is if you're wanting to be able to roll up to lights in third or second and pop it straight into neutral, or you want to come down two or three gears, say out of 5th and back to second, but they shift quick enough it doesn't really matter
    • Duncan
      Battle of the broken skylines

      By Duncan · Posted

      I'm not a drag racing guy, but that was a good watch. Didn't Ibrahim's car have some cooch! But the big question is....WTF is with so many of them running without seatbelts!
    • r32-25t
      R32 gtr transmission strength, billet plate

      By r32-25t · Posted

      Sequential Is fine to drive on the street
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Well that is not a sign of good quality..  Understand, but not so nice to drive on the street I suppose and out of my price range..
    • rb finatic
      Looking for a mechanic for my build

      By rb finatic · Posted

      I recently got myself a 1989 r32 GT-R and it has some slight smokiness from the exhaust and misfires sometimes when coming off the throttle. I'm looking for a good mechanic in the Brisbane region who will do a good job on it. It'll need a diagnosis, and most likely an engine rebuild with refurb/stock parts (not looking for a motorsport build... yet). If anyone has done something like this before/knows stuff about this in terms of who can do it and how much it cost, I'd like to hear about it. I was looking on the forum and I found some posts from 2020 that were similar to this, but it has been a while since then so if anyone has any updated info that would be great.  I'm also new to the forum so if this topic should be in a different place please let me know. Thanks in advance!  
×
×
  • Create New...