Jump to content
SAU Community

Recommended Posts

R34 gtr
1999 r34 vspec
Rb26dett
Twin greddy t517z turbos
splitfire coil packs
Nismo 850cc injectors
Tomie 256 cams
Os giken cam gears
GatesTiming belt
Trust 100mm cooler
Greddy hard pipe kit
Apexi power intake kit with pods
Nismo air flow meters
Nismo thermostat
Alloy catch tank
Polished plenium and intake pipe
Copper radiator
Hks boost conttoller
Apexi power fc with hand conteoller
Hks oil cooler and air diversion kit
Nismo fuel reg
Nismo fuel pump with tomie wiring harness
Twin plate exedy carbon d clutch
Stainless apexi dump pipe and full exhaust
Slotted front rotors
Work meister 18x10.5 +12
Bridgestone portenze re002 all round
Z tune style front bar
Carbon side skirt and rear extensions
Longer wing stands
Apexi coilovers
Nismo tail lights
141000klm
Nismo dash
Sony double din screen
Reversing camera
Clarion hx splits up front
Clarion hx 6 1/2 speakers
Hx digital amp
34 vspc plates come with the car
Makes 350awkw on 20 psi tuned by powertune australia
Location port macquarie nsw
Contact shaun
0434390208

Price 69000 or swap with cash adjustment for another jap car wouldnt mind a four door r34 or evo ect 
 

IMG_20160418_210347.jpg

IMG_20160209_200732.jpg

IMG_20160209_200618.jpg

received_10153995019698778.jpeg

20151119_190903.jpg

14691770016472045231591.jpg

1469177100470-520687988.jpg

14691771231261694944767.jpg

14691772269681365681107.jpg

1469177243333757254998.jpg

1469177270918-848368922.jpg

14691773006841870122955.jpg

  • Like 4
Link to comment
https://www.sau.com.au/forums/topic/465927-sold-r34-gtr-vspec/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
On Tuesday, August 23, 2016 at 9:01 PM, 34GDZ said:

Have you got a pic of this car on the side? I want to see how slanted the superior auto wingstands are 

 

20151119_190716.jpg

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...