Jump to content
SAU Community

Shockworks Presents Round 9 - Sandown Raceway 1st Oct | Grand Final Day


Recommended Posts

1 minute ago, acsplit said:

Next 10 days or so, what would you like to know?

Cheers. I've got an older helmet with the date worn off and scrutineers are sometimes a little iffy about it.
I know that there's recent rule changes for fire extinguisher dates, what's the go with helmets?

52 minutes ago, V28VX37 said:

Cheers. I've got an older helmet with the date worn off and scrutineers are sometimes a little iffy about it.
I know that there's recent rule changes for fire extinguisher dates, what's the go with helmets?

Let me get back to you

  • Like 1

Got my spot. First time around sandown since 2009 or so when I was 19! Apart from that one drift day I went to, but we don't talk about that..

On 8/26/2016 at 0:18 PM, acsplit said:

Let me get back to you

Thanks man. If I need to get a new one the 2016 Bell Qualifier looks decent, it's ECE 22.05 Standard Certified.

The CAMS Schedule D lists under Level A Standard 'E22 (with 03, 04 or 05 amendments)' – can anyone please confirm if this is the same?

Will get some confirmation from CAMS for you.

Ok discount entries sold out! 

Get your entry in asap as the day is capped at 60 which is half the normal capacity.

  • Like 1

Ok guys here is the info on helmets and fire extinguishers

Most helmets from your local motorbike shop will pass the requirement. Which is it must have the AS/NZS 1698 sticker or greater.

However you get what you pay for, so the cheaper helmets are heavier, bulkier and hotter. I'd suggest something in $200 range, as that provides good overall value.

The fire extinguisher must be 900g or larger with a standards sticker of as1841 (not as1841.2). Which you can get from autobarn or supercheap, make sure it has a metal bracket. The date stamped on the bottle is only valid for 3 years, so get one with this years date on it. You need to 'bolt' it to the car which you can grab from here. This bracket bolts straight to the seat, without the need for drilling or cutting

  • Like 1
Ok guys here is the info on helmets and fire extinguishers

Most helmets from your local motorbike shop will pass the requirement. Which is it must have the AS/NZS 1698 sticker or greater.

However you get what you pay for, so the cheaper helmets are heavier, bulkier and hotter. I'd suggest something in $200 range, as that provides good overall value.

The fire extinguisher must be 900g or larger with a standards sticker of as1841 (not as1841.2). Which you can get from autobarn or supercheap, make sure it has a metal bracket. The date stamped on the bottle is only valid for 3 years, so get one with this years date on it. You need to 'bolt' it to the car which you can grab from here. This bracket bolts straight to the seat, without the need for drilling or cutting


Thanks! So no date requirement on the helmet?
1 hour ago, V28VX37 said:


Thanks! So no date requirement on the helmet?

No, however if you feel like your helmet could be borderline unsafe due to it's age (or if it has ever been in an impact (including dropping it on the ground)) then personally I highly recommend getting yourself a new one.

It's amazing how many people try to sneak through with dodgy things, when the restrictions are there for their own safety... The CAMS scrutineers have seen it all, so if in doubt, don't risk it.

  • Like 1
No, however if you feel like your helmet could be borderline unsafe due to it's age (or if it has ever been in an impact (including dropping it on the ground)) then personally I highly recommend getting yourself a new one.

It's amazing how many people try to sneak through with dodgy things, when the restrictions are there for their own safety... The CAMS scrutineers have seen it all, so if in doubt, don't risk it.

Fair enough. I know that a motorcycle helmet is the easiest option but where do people go for entry level Hans enabled ones in Melbourne?




  • Latest Posts

    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
    • Hey all, Noticed I have a hole on top of which im guessing is my transfer case/gearbox. I can see it from the middle of my firewall looking down. S1 R33 gtr Any advice or can pinpoint what this is/caused this?
×
×
  • Create New...