Jump to content
SAU Community

Recommended Posts

R33 GTST HICAS problems

Hi guys. I got an issue with my 1994 s1 R33 GTST's hicas.

If I drive over 80km/h the hicas light will be turned on, then I will randomly lose power steering on next start.  It is becoming more and more often recently.

I tried to enter hicas diagnose mode to see what is wrong. However, to my surprise, my r33 cannot enter diagnose mode. I followed this post but nothing happened.  http://www.sau.com.au/forums/topic/22193-hicas-diagnostic/

Here is my guess. My boss kit seems to be a normal boss kit that does not come with hicas. So when the hicas system kicks in, it cannot detect the steering wheel. Then the hicas light is turned on and I got heavy steering. This guess can also explain why my R33 cannot enter diagnose mode, I think.

 

Can anyone give me some idea? Will the boss kit cause this issue or something else?

 

Btw does anyone know some cheap skyline specialist in Melbourne?

 

I am not a native English speaker. So please do not mind my mistakes. Thanks guys.

 

 

Edited by Michael33
Link to comment
https://www.sau.com.au/forums/topic/466954-r33-gtst-hicas-problem/
Share on other sites

Did the problem start after you installed the aftermarket steering boss?

HICAS relies on a steering angle input to function correctly, if you've recently installed a steering boss which does is not compatible with HICAS it will cause the HICAS ECU to go into 'safe mode' which results in the heavy steering and warning light on the dash.

  • Like 2

It is really sensitive too btw. I had the right boss kit but installed it wrong so there was the slightest bit off free play on the steering angle sensor and had the same issue as you

Also later on i would have no power steering assist after startup sometimes randomly. Had to replace the HICAS ECU.

4 hours ago, colourclassic said:

Did the problem start after you installed the aftermarket steering boss?

HICAS relies on a steering angle input to function correctly, if you've recently installed a steering boss which does is not compatible with HICAS it will cause the HICAS ECU to go into 'safe mode' which results in the heavy steering and warning light on the dash.

 

Thanks for replying. I am not sure about the boss kit. The one on the car has been there since I got the car.

However, even I got warning light since last year but I did not get heavy steering until 2 months ago.Pretty tricky.

 

I just find this. http://www.jdmr32.com/hicas-aftermarket-steering-wheel-error-light/

It looks like I should buy a consult interface and maybe a hicas equipped boss as well.

 

13 minutes ago, 89CAL said:

It is really sensitive too btw. I had the right boss kit but installed it wrong so there was the slightest bit off free play on the steering angle sensor and had the same issue as you

Also later on i would have no power steering assist after startup sometimes randomly. Had to replace the HICAS ECU.

 

Why replace the HIACS ECU? Is it broken?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...