Jump to content
SAU Community

Massive R33 Gt-R Time Attack/Circuit Car Part Out, Racepace Built

Daz
 Share

Recommended Posts

Daz Grand Master

Daz

Posted
Posted (edited)

Hi all,

 

For those familiar with the car I purchased the Rice Racing GTR last week. This is a car that has seen 1.15 around Sandown & 1.39 around Phillip Island; a car that is proven and sorted as much as a car can be.

 

The car is a 1998 model series 3 and is in good condition with most parts in excellent or like new condition. The chassis has seen less than 40,000kms.

 

I simply purchased the car for a couple of bits and it is a shame to part the car out (the previous owner was almost in tears seeing the car go, and after seeing the work & R&D I am regretting the part out also) however I have made the decision.

 

The car only has top shelf items (N1 block, HKS 2.8 Stroker, new Holinger 6 Speed Sequential etc).

 

Also the previous owner was meticulous – I can supply receipts for just about everything J

 

Please note any low ball offers will be ignored.

 

So here is the list of parts.

 

 

ENGINE

 

1.                       1.  N1 HKS 2.8 Stroker Long motor built by RacePace.

                Basically you get everything from the sump to rocker covers, and also all the inlet side. This motor has all the fruit, HKS crank, pistons, rods, Tomei oil pump, N1 water pump, Racepace 9 litre sump, Racepace                         head work.

According to the previous owner the motor has only seen approx 800kms (track kms).

                PRICE: $13,000 ONO                       

 

          2.     2  x Garrett GT2860R Turbochargers (AKA GTR -5's)

            Has seen less than 1,000kms, comes with 1 bar wastegate actuators

Excellent condition

PRICE: $1,800 ONO                           

 

3.     WOLF V550 Plug In for R33 GTR ECU (includes tune)

           PRICE: $1,300 ONO

 

         4.     Racepak Dash IQ3

            PRICE: $850 ONO           

                                            

CAN DO A PACKAGE DEAL FOR ENGINE, TURBOS, COMPUTER (EVEN HAVE THE FUEL SYSTEM)

 

 

SHELL

        1.     1998 R33 GTR Shell

 

PLEASE NOTE THIS SHELL CAN BE REGISTERED (might need to remove comprehensive cage though).

The rolling shell includes a 6-point comprehensive roll cage built by White Brothers that is CAMS approved and log booked (log book will be supplied upon sale). The car has custom door trims, rear firewall paneling, RPM modified cusco upper control arms, cusco castor rods and much more aftermarket suspension bits and other.

The shell will also include a custom surge tank, near new Pierburg external fuel pump, sparco steering wheel, quick release and various other upgrades. 

Note as I am selling the aero separately the car will be supplied with a factory bonnet and factory wing.

Body is in good condition, just a couple of minor scratches and dints

PRICE: $14,000 ONO

 

 

AERO

1.     Topstage V3 Motorsport Wing (RRP - $2,650)

           Excellent condition                                                                                            

PRICE: $2,300 ONO

 

 2.         Topstage V3 Motorsport Bonnet (RRP - $2,450)

             Excellent condition

PRICE: $2,100 ONO

 

 3.Topstage R33 GTR V3 aero lip (RRP - $1,460)

           Few marks at the bottom however in very good condition

PRICE: $1,200 ONO            

 

CAN DO A DEAL FOR THE FULL AERO KIT – HOPEFULLY SOMEONE WANTS TO BUILD A TIME ATTACK R33 GTR

 

 

SUSPENSION & BRAKES

         1.     AP Racing Big Brake Kit (Front & Rear)

           The kit includes everything you need to bolt up to a R33 GTR, including calipers, hats, rotors, brackets, pads and braided brake lines.

Fronts are CP555 calipers & Rears are CP5144.

Front rotors are 362mm x 32mm and rears are 330mm x27.8mm

Condition, excellent working condition however calipers are somewhat faded. The rear rotors are basically new as well as the pads. The front rotors are near new as well as the pads.

PRICE: $6,500 ONO        

 

     2.     MCA Proflex Coilover Shocks (Tein Tops) with “Frequency Sensitive” remote canisters (RRP with springs $5,475)

           Serious bit of suspension

                In very good condition

PRICE: $3,800 ONO        

 

      3.     Rays VOLK RE30 Club Sports 18x10.5 +15 wheels

            Very good condition, few little marks here and there (Comes with Pirelli slicks, can separate slicks also)

PRICE: $3,500 ONO

 

4.     Rays Volk LE37 18x9.5

            Very good condition, few little marks here and there (comes with wets – note not road tires)

PRICE: $2,600 ONO

 

 

OTHER

 

1.     Full Racepace 4”Exhaust

Exhaust is in excellent condition, just a small dint/scratch on one muffler

This is the full version from dump pipes back – twin 3” merged to 4”

PRICE: $3,300 ONO    

 

          2.     Racepace custom oil catch tank with built in washer bottle

             Excellent condition                

PRICE: $480 ONO                 

 

        3.     Cobra Evolution GT Race Seat with Schroth Harness

             Large size

Very good condition

PRICE: $1,100 ONO    

 

4.     Tomei Expreme Dump Pipes

              Very good condition    

PRICE: $500 ONO

 

        5.     PWR (RPM) radiator (RRP - $1,280)

Very good condition

PRICE: $800 ONO

 

6.     PWR Intercooler

             Good condition

PRICE: $600 ONO

 

          7.      Racepace Oil Cooler Kit

Good condition

PRICE: $750 ONO

                    

If interested it would be best to sms or call me on 0409167229 to get the quickest response.

Car and parts are located in SE Melbourne VIC, but will ship interstate at buyer’s expense.

Again please no low ball offers.

Cheers,

Darren

GTR PIC 1.jpg

GTR Load.PNG

GTR Tow.PNG

wheels2.PNG

LE37.PNG

Suspension.PNG

AP Brakes.PNG

Edited by Daz
Formatting
R32GOJIRA Mentor

R32GOJIRA

Posted
Posted

Is the car running a pedal box? If so, what type?

And is the dash a logger dash or just display?

Smally514 Contributor

Smally514

Posted
Posted

What's the measurements of those brakes? I have GTS-T 33 S2
After market rims with 32+ offset on front and 30+ rear if they will fin that spec I'm very interested as I'm in need of good brakes soon.

Smally514 Contributor

Smally514

Posted
Posted

Never mind that..... Should have read before I just jumped to pictures. Ill do some research and get back to you about those brakes.

  • Like 1
Daz Grand Master

Daz

Posted
  • Author
Posted
29 minutes ago, Smally514 said:

Never mind that..... Should have read before I just jumped to pictures. Ill do some research and get back to you about those brakes.

Sorry rear diff will go with rolling shell

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Rusty roof repair

      By PranK · Posted

      Some of the filler.   Also if I look under the top flap of metal it starts looking good quite close to the edge. I get the feeling it doesn't go much further.
    • PranK
      Rusty roof repair

      By PranK · Posted

      So, I finally started digging at the bit of my roof that was cracking and bulging a bit. Well, it was just thick filler that was covering some pretty bad rust. I didn't find the edges, I was too bummed to keep going.  There are a few holes as you can see. There was just so much filler but looks like no attempt under the filler to prime or use rust converter, just slapped filler on exposed rust.  Anyway, I'm going to take the windshield out and find the edges. I'd love to fix this myself as I'm pretty sure it'll be expensive to get done properly. I was thinking I could just get a cut piece from another E39 and just weld it in place as it would be the right size and shape.  Thoughts?
    • Kinkstaah
      r34 Skyline 25 Gt four GTR conversion (ENR34)

      By Kinkstaah · Posted

      This is the territory of the "Stage 1/2/3 Golf GTI/R" or otherwise off the shelf tune with (relative to before) minor mods. It's easier now. Downpipe and Tune and boom, big increases. Stage 1 OEM+ is where it's at. This is where the niche evolved into and it's really easy to see why. It's rare to even NEED to consider changing turbos or going to aftermarket ECU's or building bottom ends for more power. Stage 1-2-3 will get you a LONG WAY. Civic Type R turbo GR Yaris/Corolla Anything with B58 (MKV Supra/x40i) Anything BMW in General Anything Audi in General Any turbo AMG RenaultSport Turbo offerings Korean Elantra N/I30N Ecoboost Mustangs Focus RS? List goes on. I would argue in the future it won't even need to go on... M3P is pretty rapid out of the box...
    • MBS206
      r34 Skyline 25 Gt four GTR conversion (ENR34)

      By MBS206 · Posted

      There is a way, but it's not with the same cars. You need to find the same vintage of car, that we had. Realistically, that was an affordable car with aftermarket parts around. So what people need to find is a car that had a decent base in its day, and can be modified. They're looking for a car year make of 2010 to 2015 really... Aus could have done it if Holden didn't fold as V8 commodores were cheap, and if Ford didn't get expensive thanks to COVID, then you could cheaply play with FG Barras. Realistically, those are just a bit heavier, four door skylines. I'm sure the US and UK have similar cars they could find.
    • Predator1
      Ogura orc1000f vs Osg tr2cd vs Osg r3c experiences, max torque/max hp?

      By Predator1 · Posted

      Haha I do that.. thats when it chirps..The bit point for me is almost non-existent. Otherwise I stall it. But yes, in terms of performance, the clutch is solid af.
×
×
  • Create New...