R31. Help with ics and TPS.

[Jakehoak]

R31. Help with ics and TPS.

Hi all. 

Hot a problem with my idol switch and Throttle position switch. I managed to get them working sweet this week with no stall and fuel problems. But then this morning got in and started her and it was sluggish on takeoff again and gluggy when sitting at lights. Last week I managed to get the faults on the computer sorted so they didn't flash for fault 23,24. But now comp reads there faulty again. It looks like that haven't moved at all so just wondering if anyone can help befor I start the process of fixing them again. Cheers 

[niZmO_Man]

Aussie R31? Might be AFM. Check the CAS as well (I'd pull the dizzy cap off, remove the rotor thingy, remove the plate and inspect the disc, it might have rust on it from the bearings).

[Jakehoak]

Yeah cheers mate. Did the dizzy cap last nite and leads and it's all good now. Think my leads were faulty. There only a month old. So put the old ones on and all good. I replaced the cas and rotor disc a couple weeks ago. So there ok. Think combo of dirty cap and faulty leads was the issue. Cheers 

[Steve85]

I used to have a Pulsar, it used to go through leads like crazy. After about the 4th set, i realised that i had left a heat shield off the exhaust and they were being cooked. Maybe you are suffering a similar fate?

[niZmO_Man]

On the R31 the leads don't go close enough to the exhaust.

[Steve85]

Fair enough. Just throwing ideas at you. Sometimes im helpful, sometimes not so much.