Jump to content
SAU Community

Problems with 1995 gtst

MISTIQUE
 Share

Recommended Posts

fordxr Newbie

fordxr

Posted
Posted
thats alright, ill take that on the chin.  

but there is a big difference between expensive and overpriced.

on topic, get a series 2.

:) Well said aybee. :)

So apart from obvious cosmetic difference between the series 1 and 2 (body kit, interior, ECU) was there any faults with the series I over the series II?

The car MISTIQUE is in fact enquiring about is (apparently) a 1995 series 1.5.

So is it worth while spending a little more and looking around for a series II, or are they much the same?

Cheers.

superspit Mentor

superspit

Posted
Posted
Ok the only problem i can say with every R33 is water getting in the rear lights :) I cant get it out :)

Hey K, yeah,

I had the same problem with my 95T with water in the rear right lamp. ended up just pulling the thing completely off the car, re-sealing it with non-acidic silicon (can be cut-out in you next accident), then re-applying while semi dry. Also, running a small bead of silicon around the upper seal (while the lamps is installed) also completely keeps water out. (don't worry about using silicon, as it does less damage to your car than allowing water to 'come in and stay). I bet that on warmer days, the water 'condenses' and appears on your rear windscreen???????

It eventually kills everything in your boot!!!

As for series2 Sklines'....I much prefer the very last series 1's. Their front bumper looks more aggressive (as opposed to the odd looking round indicators of s2). The last S1 has most of the s2 stuff, just cheaper and better looking front...mmmmmm...very subjective thought :Oops: !!!

Anyways.......

SuperSpitMark.

JimX Grand Master

JimX

Posted
Posted
So apart from obvious cosmetic difference between the series 1 and 2 (body kit, interior, ECU) was there any faults with the series I over the series II?

The car MISTIQUE is in fact enquiring about is (apparently) a 1995 series 1.5.

So is it worth while spending a little more and looking around for a series II, or are they much the same?

Cheers.

The main "fault" with the series 1 was the ECU, which tends to run way too rich when upping the boost. You can easily fix this with an S-AFC, and bring it up to the same power levels as the later ECU. The 95 series 1.5 uses the updated ECU and so doesn't have this problem.

The only other minor fault I can think of is the dash surround and door handle surround is coated in this thin rubber type stuff, which tends to peel fairly easily. This was fixed with the series 2 (not 1.5). But that's really minor.

These cars aren't like Commodores and Falcons which get released with a whole BUNCH of problems, and then they fix half of them with the series 2, and then change models and start off with a whole new bigger batch of problems. This is the reason why I think the VS series 2 Commodore is a less buggy car than a VT series 1.

krzysiu Grand Master

krzysiu

Posted
Posted
Hey K, yeah,

I had the same problem with my 95T with water in the rear right lamp. ended up just pulling the thing completely off the car, re-sealing it with non-acidic silicon (can be cut-out in you next accident), then re-applying while semi dry. Also, running a small bead of silicon around the upper seal (while the lamps is installed) also completely keeps water out. (don't worry about using silicon, as it does less damage to your car than allowing water to 'come in and stay). I bet that on warmer days, the water 'condenses' and appears on your rear windscreen???????

It eventually kills everything in your boot!!!

As for series2 Sklines'....I much prefer the very last series 1's. Their front bumper looks more aggressive (as opposed to the odd looking round indicators of s2). The  last S1 has most of the s2 stuff, just cheaper and better looking front...mmmmmm...very subjective thought  :Oops: !!!

Anyways.......

SuperSpitMark.

Thx for that, its my Rear Right one too :)

rs73 Grand Master

rs73

Posted
Posted

Fuel consumption will feel bad especially when you jumped from a previous 4-cyl common shopping carts. Heck even my bro complaint about fuel consumption after he replaced his 95 Civic sedan with the new Accord Euro - and his 4-cyl Accord Euro consumption is still LESS than my car!

aybee Experienced

aybee

Posted
Posted
As for series2 Sklines'....I much prefer the very last series 1's. Their front bumper looks more aggressive (as opposed to the odd looking round indicators of s2

thats ironic, cause pretty much the only reason i dont like the S1 is cause of the front bar. i think its even got to the stage where i see a stock S1 and cringe at the sight of its front end.

as for the wings, i dont really mind the S1 wing cause its more subtle.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • Kinkstaah
      Strange issue RB25DET wont start

      By Kinkstaah · Posted

      I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • Kinkstaah
      First time Skyline owner

      By Kinkstaah · Posted

      The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • Kinkstaah
      Chris' Toyota Mark ii JZX110

      By Kinkstaah · Posted

      I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • GTSBoy
      Chris' Toyota Mark ii JZX110

      By GTSBoy · Posted

      I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...