Jump to content
SAU Community

Problems with 1995 gtst

MISTIQUE
 Share

Recommended Posts

fordxr Newbie

fordxr

Posted
Posted
thats alright, ill take that on the chin.  

but there is a big difference between expensive and overpriced.

on topic, get a series 2.

:) Well said aybee. :)

So apart from obvious cosmetic difference between the series 1 and 2 (body kit, interior, ECU) was there any faults with the series I over the series II?

The car MISTIQUE is in fact enquiring about is (apparently) a 1995 series 1.5.

So is it worth while spending a little more and looking around for a series II, or are they much the same?

Cheers.

superspit Mentor

superspit

Posted
Posted
Ok the only problem i can say with every R33 is water getting in the rear lights :) I cant get it out :)

Hey K, yeah,

I had the same problem with my 95T with water in the rear right lamp. ended up just pulling the thing completely off the car, re-sealing it with non-acidic silicon (can be cut-out in you next accident), then re-applying while semi dry. Also, running a small bead of silicon around the upper seal (while the lamps is installed) also completely keeps water out. (don't worry about using silicon, as it does less damage to your car than allowing water to 'come in and stay). I bet that on warmer days, the water 'condenses' and appears on your rear windscreen???????

It eventually kills everything in your boot!!!

As for series2 Sklines'....I much prefer the very last series 1's. Their front bumper looks more aggressive (as opposed to the odd looking round indicators of s2). The last S1 has most of the s2 stuff, just cheaper and better looking front...mmmmmm...very subjective thought :Oops: !!!

Anyways.......

SuperSpitMark.

JimX Grand Master

JimX

Posted
Posted
So apart from obvious cosmetic difference between the series 1 and 2 (body kit, interior, ECU) was there any faults with the series I over the series II?

The car MISTIQUE is in fact enquiring about is (apparently) a 1995 series 1.5.

So is it worth while spending a little more and looking around for a series II, or are they much the same?

Cheers.

The main "fault" with the series 1 was the ECU, which tends to run way too rich when upping the boost. You can easily fix this with an S-AFC, and bring it up to the same power levels as the later ECU. The 95 series 1.5 uses the updated ECU and so doesn't have this problem.

The only other minor fault I can think of is the dash surround and door handle surround is coated in this thin rubber type stuff, which tends to peel fairly easily. This was fixed with the series 2 (not 1.5). But that's really minor.

These cars aren't like Commodores and Falcons which get released with a whole BUNCH of problems, and then they fix half of them with the series 2, and then change models and start off with a whole new bigger batch of problems. This is the reason why I think the VS series 2 Commodore is a less buggy car than a VT series 1.

krzysiu Grand Master

krzysiu

Posted
Posted
Hey K, yeah,

I had the same problem with my 95T with water in the rear right lamp. ended up just pulling the thing completely off the car, re-sealing it with non-acidic silicon (can be cut-out in you next accident), then re-applying while semi dry. Also, running a small bead of silicon around the upper seal (while the lamps is installed) also completely keeps water out. (don't worry about using silicon, as it does less damage to your car than allowing water to 'come in and stay). I bet that on warmer days, the water 'condenses' and appears on your rear windscreen???????

It eventually kills everything in your boot!!!

As for series2 Sklines'....I much prefer the very last series 1's. Their front bumper looks more aggressive (as opposed to the odd looking round indicators of s2). The  last S1 has most of the s2 stuff, just cheaper and better looking front...mmmmmm...very subjective thought  :Oops: !!!

Anyways.......

SuperSpitMark.

Thx for that, its my Rear Right one too :)

rs73 Grand Master

rs73

Posted
Posted

Fuel consumption will feel bad especially when you jumped from a previous 4-cyl common shopping carts. Heck even my bro complaint about fuel consumption after he replaced his 95 Civic sedan with the new Accord Euro - and his 4-cyl Accord Euro consumption is still LESS than my car!

aybee Experienced

aybee

Posted
Posted
As for series2 Sklines'....I much prefer the very last series 1's. Their front bumper looks more aggressive (as opposed to the odd looking round indicators of s2

thats ironic, cause pretty much the only reason i dont like the S1 is cause of the front bar. i think its even got to the stage where i see a stock S1 and cringe at the sight of its front end.

as for the wings, i dont really mind the S1 wing cause its more subtle.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • bilbo117
      R34 GTR Seats / No longer reclining

      By bilbo117 · Posted

      Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • joshuaho96
      Ethanol Content Sensor - Always at 11%?

      By joshuaho96 · Posted

      The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • GTSBoy
      R34 Skyline climate control unit transistor

      By GTSBoy · Posted

      It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...