Jump to content
SAU Community

Recommended Posts

I had a look through the ANDRA rule book for a checklist for what must be done once you run break into the ten second zone (10.999 or quicker).

Let me know if I've missed anything!

+ 1.4 Credentials: Need ANDRA membership and Unlimited Drag Racing Licence (UDL). To get a UDL you need to undergo a medical examination. You can download the forms for these things at the ANDRA site.

+ 1.7 ANDRA Log Books. Need to apply for log books and have a tech inspection on your racecar. You can download the form at the ANDRA site.

+ 2.3 Driveline. A tailshaft loop is required for cars 12.99 or quicker.

+ 2.6 Flywheel Shields/Bellhousings. Required to use a steel or titanum bellhousing or shield according to SFI 4.1 or 9.1. You can use a ballistic blanket instead if there is no commercially available steel bellhousing.

+ 4.6 Parachutes. If your car runs faster than 140 MPH a parachute must be fitted and deployed on each run.

+ 4.7 Roll Cage. Full cage mounted at a minimum of six points (or if faster than 140 MPH).

+ 5.2 Tyres. Quicker than 12.50 you cannot use radial fronts with slicks on the rear.

+ 5.3 Wheels. Must be fitted with open ended wheel nuts.

+ 6.2 Window Nets. Must be fitted between side and top bars on the driver's side.

+ 8.1 Batteries. Require a blue triangle to indicate battery location. If quicker than 11.99 you require a battery isolation switch located in the battery location maker.

+ 9.1 Technical Inspections. Require tech inspection every two years.

+ 10.8 Helmet. Adhering to Australian Standard AS 1698 1974/1988

+ 10.10 Protective Clothing. Require fireproof gloves, shoes, socks and a race suit adhering to one of: SFI 3.2A/5, FIA Norme 1986 or FIA Norme 8856-2000

+ 10.11 Harness. Faster than 130 MPH requires a five point harness with crotch strap. Quicker than 11.99 requires a four point harness.

  • 3 weeks later...
+ 5.2 Tyres. Quicker than 12.50 you cannot use radial fronts with slicks on the rear.

AHEM! :)

Dunno about this quicker than 11.99 bollocks though :(

Clint, dunno if the whole book is online - try www.andra.com.au

Adrian

What exactly is a tailshaft loop?

This is a loop of steel that surrounds the tailshaft in the event that it should break, snap, let go etc and keeps it from digging into the surface of the track and flipping your car many many times :)

Picture this, your tailshaft fails for whatever reason and drops out of the gearbox (or similar) and points straight at the tarmac while you're halfway through your run doing 100mph. All bad.

Adrian

front shaft loops = yes

drive shaft loops = no

Front and tail shafts in GTR's face in the direction of travel and therefore pose a roll-over risk. Drive shafts do not.

Adrian

whats andras standing on split tailshafts though?? it used to be you didnt have to have a loop on a car with a centre bearing, such an a skyline... Oh another interesting point was the harness one obviously they dont enforce this rule very often as there are alot of cars i see competing time and time again without a harness that according to the rule need one!!!

..

Oh another interesting point was the harness one obviously they dont enforce this rule very often as there are alot of cars i see competing time and time again without a harness that according to the rule need one!!!

Enforcing of the ANDRA rules at WSID seems to be inconsistent to me.

I got bounced 11/8/2004 for running slicks with radials on the front. I counted several other competitors doing the same thing who were allowed to do so by the same officials who pulled me up for it.

Anyone who runs 11.999 or quicker should have a four point harness, yet there are numerous competitors who break that rule.

On 12/6/2004 I ran against George in HYP10A when he ran 9.355 @ 145.44 MPH yet the car was not fitted with a parachute.

As for needing a tailshaft loop when you run 12.999 or quicker, how many times have the scrutineers jacked your car up to check?

The ANDRA rules are not enforced in a consistent manner by WSID scrutineers or ANDRA officials at the track. I think all the rules make sense and don't complain about any of them. But it's hard to swallow when the rules are enforced inconsistently, especially when you are on the wrong side of that inconsistency!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...