Jump to content
SAU Community

Recommended Posts

Penrite 10w-50 vs 10 tenths?

Hi all,

Received a bottle of Penrite HPR 10W-50.  Reading posts and The Goods On Oils it seems the consensus is Penrite 10W-40 10 Tenths.  It is for an R33 GTR.

For the uneducated (me), I'd say the HPR 10W-50 is fine.  Before dumping the unknown oil in there, what are people's thoughts on the HPR 10W-50?

Cheers!

Edited by phatmonk
Link to comment
https://www.sau.com.au/forums/topic/468794-penrite-10w-50-vs-10-tenths/
Share on other sites

Motul all the way for me but every car is different. Since you have the oil (one bottle? - what's that in litres>) just chuck it in and try it - your motor won't seize up  - just monitor heat, oil pressure etc and see how you go.


Go read the 200 pages of the dedicated oils thread here on sau.

It's about 330 pages. I had a look, TLDR it all... It's a forum; I used search, looked at the stickies and asked a question. That's what happens, right? Maybe I'm simpler than you, sorry.

HRP10 is a 10W-40 oil that has some additives that makes it a '50' when hot.

Racing 10 (10Tenths) is a full syn oil (more expensive, on par with Royal Purple, Motul Chrono, etc, group 5 oil I believe?)

Either will be fine. The Racing 10 has better shear properties at high temps/pressures. So if your engine cops some track work, I'd use that over HPR. HPR is fine for street driving.

  • Like 1

The huge oil thread has the answer, but it can take quite a while to trawl through it. You'll learn heaps though, people like to get technical around here (which is a good thing). Now go read the RB oil control thread :P .

Oh and on my GT-R, standard engine/boost/no oil cooler, I ran Racing 10 (10W-40) and Premium 5 (5W-60) on the track with no noticeable difference (going off engine noise and standard oil pressure gauge, car ran hot because I didn't flush the cooling system). Back in the early days I ran HPR10 for street duties and it was fine.

My answer was an actual answer. But I have used 15W-50 in my car for years and it has been fine. 40+ degree drift days at QR and I beat my engine harder than an unwanted red headed stepchild and it has never let me down. No oil cooler either.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...