Jump to content
SAU Community

Recommended Posts

Rb20det Holden Rodeo

Hey Guys I'm new to this Web page, I purchased a 91 Holden rodeo about a year ago now and have been working on it for about 6 months and its heading off to the shop this week for final parts e.g ECU, Tune and timing. just thought id give you guys a look and wondered if there's any other people out there with converted Utes, plenty more work to come, and will upload threw the process and hopefully get some videos in the end, also happy to answer any questions about the build

$_75.JPG

$_90.jpg

15078983_1763054630626886_3482582941081128637_n.jpg

15027370_1763054633960219_2275057343505813178_n.jpg

15078870_1763054643960218_2815244986969794889_n.jpg

FB_IMG_14680458976747459.jpg

IMAG0084 (2).jpg

IMG_20160929_135857.jpg

15094974_1763054637293552_2358540064954043444_n.jpg

IMG_20161228_175622.jpg

IMG_20161229_115523.jpg

IMG_20161230_153400.jpg

dd.jpg

IMG_20170116_18001811.jpg

IMG_20170108_160107.jpg

IMG_20170207_115844.jpg

Link to comment
https://www.sau.com.au/forums/topic/468967-rb20det-holden-rodeo/
Share on other sites

  • 4 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...