Jump to content
SAU Community

Recommended Posts

44 minutes ago, niZmO_Man said:

PS4 is out apparently.

Yes there is only one size in 19's unfortunately which is the rear tyre size only so no staggered width (to match the stock setup and rims). The PS4S appear to have more sizes but isn't out yet.

I'm contemplating waiting it out for the PS4S but will check the compound as I have driven R compound before (I think they were 140 treadwear or so) and found daily driving required wheel spin in the 200sx to get traction on a commute in winter.

 

8 hours ago, R377 said:

Go ps2 or 3, RS3 or AD08. Maybe look at nitto

PS2 don't have suitable sizes in 19's for the V36 with stock 19 staggered rims from what I saw. Edit: OK, so the sites I was looking at had the 245/40/19 out of stock but appears 245/40/19 at front and 265/35/19 at the rear might be a possibility.... Although with the PS4 out I didn't look so hard at the PS2.. But this is a possibility now.

The PS3 is less of a performance tyre than the PS2 and PS4 (it's not an upgraded PS2 design necessarily) from what I read so excluded that. But I could be wrong.

The RS3 unfortunately only comes in the the 245/40/19 and 275/35/19 combo which is pushing the limits for the car and rims I believe.

And the AD08 appears hard to find in the right sizes (or even 20mm wider front and back), but can find the R compound AD08R in suitable sizes (both front and back 20mm wider than stock and 1% smaller all round) but feel an R compound for 99% daily drive might not be the best choice coming into winter.

Edited by Pete_Repeat

i would go 20mm max on the orig tyres so 245 front and 265 rear.  Your prob only track it once or twice so an ad08 or rs3 although great for the track will wear out much fast than a regular tyre.

We have continental mc5 on our v36 skyline 18".  They don't do do 19".  They are super comfy, low NVH and will get good km out of them.  We will do a track day and hillclimb here and there, for fun.  For a road tyre they grip well but would prob be 2 secs a lap slower than a semi on the track - who cares we aren't going for any records and for 99.9% of our driving they do us well on the road.

 

Your pretty obsessed with the ps4, can you get them from overseas ? 

1 hour ago, admS15 said:

AD08R is not an R compund. It's equivalent to a Hankook RS3.  A050/Z221  are R compound.

 

Edit Ad08 is the predecessor to ad08r, that why it would be hard to find and would be old stock 

Makes sense.

Anyone used or advise the AD08R for daily use then? Just their marketing really focus' on the track. I don't mind firm ride or anything, and would prefer a good turnin an less tyre roll but more concerned about getting heat into them.

 

Maybe I need to google a little more on them then.

I'd go 245/40 front and 265/35 rear

http://www.stgeorgetyres.com.au/tyres/yokohama-neova-ad08-265-35r19-semi-slick-tyres-2653519-265-35-19/product-detail.aspx

That's probably old stock, best to ask for production date

AD08 (not R), mate's old MY05 WRX STi, quite comfortable for daily use, more wet grip than the standard RE070. No track work unfortunately (he sold the car soon after). Extreme overkill for daily use but if you're tracking it, then might as well get them (or Potenza RE-71R). If you're doing a lot of driving then I'd go something like INVO or similar road tyre.

  • 1 month later...

OK. I am now determined to get the new Pilot Sport 4S. Stress on the S.

So it looks like the stock fronts 225/45/19 are ehre, but the rear 245/40/19 has no defined date (if any). Only available in the US at the moment.

So I am looking at the following with pro's and cons to each;

- Stock sizes

        - Too long a wait, if the 245/40/19 even get here seeing that is the only 19 inch size in the PS 4 so they may never bring it in who knows.

- 225/40/19 and 245/35/19

        - Cheapest combo by about $200 for the set of 4.

        -  Available now

        -  3.4% and 3.75% smaller rolling diameter so speedo out by almost 10% with 7% OEM error. This isn't a big problem for me really, other than when I finally track it that te 180 kmph limited will occur easier.

        - VDC and ABS should be fine I believe as almost the same reduction front and rear.

- 235/40/19 and 255/36/19

        - $200 more epxensive

        - Available mid August, although I can wait if need be

        -  2.2% and 2.6% smaller so a little less speedo error.

        -  VDC and ABS almost the same conditions as above.

 

Anyone have any comments?

Just now, The Max said:

Your determination to go with the PS4S is well-founded. I got them for the fronts because of the OEM size and they're worth every cent. They certainly outgrip my PS3 tyres in the rear.

I think I read too much as every tyre listed in this thread either didn't come in the right sizes or I eventually found feedback to say otherwise. These are the only tyre I have only  heard good feedback on. Yeh I know they are fairly new, but they have been out for 6 months in the states. 

I've gone round and round in circles really. From cheap to expensive. Tempted with some cheap option to find they were excessively noisy. Now sitting at the upper limit although the 225/40/19 and 245/35/19 (lower profile only) seem to be a "reasonable"  $1476 at the moment. I can live with the extra 3% speedo error (easier to calculate at 10% including oem error) knowing the ratio front to rear diameter/circumference is almost the same.

I'm almost there. Will likely order them unless someone throws a spanner in the works in the next day or two (more to do with sizing) . Sorta need the rears changed with this cooler weather as they spin easily in first gear in a straight line with the clutch already out.

Took the plunge. 

Pilot sport 4s with 225/40/19 and 245/35/19.

Price, availability and very similar diameter change sold me. 10 percent speed error here we come (only up a little from oem 7 percent) and 162km/h real speed limiter ha ha.

Getting installed on Saturday. 

Now deciding on wheel alignment settings. Might resurrect my other topic on this again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...