Jump to content
SAU Community

Recommended Posts

Hello.

 

I have an ecr33 skyline (rb30/25det) and going to use Nistune ecu. I have a plx afr gauge (dm-6) and it has a narrowband output so I'm wondering it it'd be worth it to use that signal for ecu? The reason i'm wondering is the plx afm is brand new and the cars o2 sensor is original (now 23 years old). I've heard that people changing o2 sensors get better fuel consumption etc so could the plx result in more accurate readings? I'm having a new downpipe/exhaust made up regardless so that doesnt matter. Dont really want to buy a new o2 sensor for ecu if I can simply use the plx for that aswell.

Thanks for any help!

 

 

The whole engine is new (bigger displacement, injectors, turbo, MAF etc) so I'll get it properly tuned anyway. Could the New sensor still be an improvement? Gonna make the exhaust on thursday so it'll be easy to set up.

Microg how did you wire yours? Tried to google for a few hours but couldnt find anything. On my o2 sensor loom (in the engine bay) I have a 3 wire oval connector with blue, Brown and a wire with a white stripe on it.

Yes, I do it all the time for cars I tune as their stock o2 is often cactus and I always recommend they install widebands.

The beauty of simulation is that you can define the voltage output vs the AFR so at times you can be smart about it and move afr range towards the leaner region so you end up cruising at 15.5 

Some widebands require a sensor ground to be connected such as the AEM UEGO or AEM Failsafe. Conenct the sensor ground with all the other sensor grounds next to the ECU.. there will be 2x bunches of sensor grounds connected to the body work.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...