Jump to content
SAU Community

Recommended Posts

Is it difficult/expensive to fix a lifter issue on an RB25 turbo engine?

Engine is still running.

Ie does it mean the Head is probably in question and Oil Cooler/Pressure.?

Full rebuild possibly?

 

I've never rebuilt an RB25, pretty keen to learn how to rebuild RB engines in general.

 

But to know when it's worth it or not is the question/knowledge i guess.

 

Cheers

Link to comment
https://www.sau.com.au/forums/topic/470708-rb25-turbo-lifter-repair-r33/
Share on other sites

Thanks!
And what if the issue was caused by oil pressure issue?
Any other things that need attention to detail?
eg oil cooler, oil pump, oil pressure stuff....

Guess it's hard to guess til it's opened up.[emoji849]

If you're saying that the engine suffered a loss of oil pressure, then your "turbo lifter repair" may actually be a repair instead of the usual "my lifters are noisy and sticky, how do I make them better" type question.  Running them at revs with not enough oil could damage them to the point where there is no repair, just replace.

I was looking at a car for sale seeing if it was worth the hassle to fix up.

Only info I was given:

Oil isn't milky

Car is still running but the guy insists it requires a tow away

And that the lifters require replacing.

Think it might require a reco engine or expensive.

 

Myself though Im really wanting the experience of trying to repair it myself under guidence from my mechanic. Shoulda just did an apprenticeship when I was younger i guess.

Ive worked on older simple cars like Gemini's etc so the RB25 is a huge jump.

 

Asking price is too high atm.

 

I sold my silver 97 40th anniversary rolling shell inc engine/tranny for $1800

The RB25 isn't that complicated, you should be fine if you have some sound mechanical knowledge under your belt as well as a mechanic to help out.

All you can do is throw the guy an offer with the price of a rebuild factored in and hope he has the sense to take it. He admitted it's a tow job after all.

  • Like 1

Compression and leakdown test, rust and paint, electrical faults. A ticking engine sound may, or may not be hydraulic lifters. The comp test will give you and idea of how much abuse she has likely seen, get her hot and see if she can keep her cool. Why does it need a tow..? cost analysis...

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...