Jump to content
SAU Community

Recommended Posts

MY16 Subaru WRX (Swap Only)

Hi all, this maybe a long shot, I am looking to swap my MY16 WRX(Manual) for a clean R32 GTR, cash adjustment can be made either way. 

Here is a little a bit about my car, i purchased the car brand new, currently has done just over 23k, always been garaged, only driven a couple hundred kms last 3 months, always do service either 3000kms / 3 months whichever come first. Tuned by Dan @ Rumble Shack in Wetherill Park (98ron: 203kw,403nm. e60: 226kw, 446nm ) ,body work is done by Mcgyer @ Auto Elements,  no money spared when comes to this car. One of a unique and tasteful new shape wrx around town. Please pm me if you have any question, thanks.

Sale Pirce:$42,000

Mods list:

Exterior

Opticoat Pro paint protection
Seibon CF bonnet
Custom made CF shroud 
APR canards
CF front lip (cracked a little bit)
CF custom made rear diffuser 
LED signal light
LED F1 style rear fog light 
Roof spoiler wrapped(CF style)

Handing-
Billetworkz gear knob 
Perrin short shifter + shifter stopper + Brass shift kit
Cusco Brake Cylinder Stopper 
Cusco Front Struct Brace TYPE OS
MCA Blues 
Volks Ray CE28 Bronze 18x9.5+40 wrapped with RE003

Engine
Cobb Accessport V3
Cobb BigSF Cold intake with airbox
Motion catch can x2
Invidia Q300 TBE (Heat wrapped Jpipe)
Mishimoto Top mount intercooler + charge pipe
Grimmespeed 3port boost solenoid
Turbosmart BPV
Cobb Flex Fuel Kit
Torquesolution egr + tgv delete
DW 300C Fuel pump

 

FB_IMG_1497779801021.jpg

FB_IMG_1497779718408.jpg

FB_IMG_1497779707105.jpg

IMG_20170608_214301_626.jpg

16936058_1601647193184833_887040080_o.jpg

16936322_1601647136518172_928931507_o.jpg

18901501_1712299415452943_1889455366_o.jpg

Edited by MightyV35
Link to comment
https://www.sau.com.au/forums/topic/471150-my16-subaru-wrx-swap-only/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...