Jump to content
SAU Community

Recommended Posts

14 hours ago, GeeDog said:

Just spoke to him, and he said that somewhere around $75 rings a bell. He bought it a few years ago. I paid an extra $20 or so to get the battery coding module a few months ago. He also bought the OBD adaptor from Carly.

Oh cool. I have a little bluetooth OBD2 thingo, I'll test it with Carly - thanks for the info.

56 minutes ago, niZmO_Man said:

I use "Torque Lite"

Yep, I have the full version of Torque. Even though my VW used a protocol that nothing could read (unless you spent hundreds of dollars).... 

That seat belt looks like one of the ones in my Commodore. Of course, the Commodore's 1996 vintage... :P 

I do love BMWs though, my first "want" car as a kid was a 635CSi, preferably in JPS racing colours. Maybe one day when the Alzheimers really kicks in I'll get one.

  • Like 1
6 minutes ago, Hertz Donut said:

That seat belt looks like one of the ones in my Commodore. Of course, the Commodore's 1996 vintage... :P 

I do love BMWs though, my first "want" car as a kid was a 635CSi, preferably in JPS racing colours. Maybe one day when the Alzheimers really kicks in I'll get one.

Oh man, I have such a thing for 635CSi's. Actually, any classic BMW's. 

Fixed the cup holder. The plastic that holds the spring had snapped. I was able to use a paper clip and some amalgamating tape to fix it. Stoked to fix and not have to replace.

  • Like 1

The other day we set the air recirc setting - default is that it goes back to fresh, but I wanted it to remember the last setting, set the nagging low fuel messages to the lowest km left setting, set the windscreen wipers to complete a sweep when the car is turned off (like every other car I've ever owned does), and disabled the headlight washers.

Previously we changed the light settings when locking & unlocking the car, set a digital speed display on the dash, removed the legal disclaimer on the NAV, coded a new battery, and several other things that I can't think of at the moment.

Carly can also reset service reminders, although this can be done without any outside assistance, using the buttons in the car.

  • Like 1

Hey @GeeDog do you find your passenger mirror is almost impossible to use? Mine is tiny and I can't see anything in it.

I'm wondering if it has the wrong glass - it might be ok if it was 'zoomed out' a bit. 

1 minute ago, GeeDog said:

Mine's ok - it has a "split" glass, where half is normal, and the outer 1/3 or so is convex. As a motorbike rider I mostly do head-checks instead of using the passenger mirror anyway.

Thats funny. I was just telling my brother in law yesterday that I can't change lanes without head checks cause of riding a bike. 

I don't think mine is split. I think I have the wrong mirror in mine. 

  • 5 weeks later...

Gave it a big wash on the weekend and thought I'd take a few better shots of it.

I'm absolutely loving driving it. Its hard to keep to the speed limit cause it just wants you to go faster.

20180109_163706.jpg

20180109_163653.jpg

20180109_163635.jpg

It hasn't all been rosy though.

The handling is odd. I believe I'm just a victim of run flats but its taking some getting used to. On a nice flat road its just gorgeous, but when there are ridges and pot holes it can tramline and pull a bit. I have been reading about my options for replacing them with normal tyres and either making room in the boot for a spare or carrying a small compressor + tyre foam stuff incase the worst happens. Prob is the Potenza's on it have SO much life left.

Can anybody else corroborate my run flats experiences?

My chrome window trims are super scratched and scuffed, so I plasti-dipped them black. Looked so shit, was so happy to be able to remove it straight away.

Also, I've found evidence of a terrible repair. So terrible that I'm almost embarresed that I missed this when looking at the car initially (though not nearly bad enough for me to not buy the car.)

The passenger side has had some kind of repair. The doors and bonnet trim gaps are a little off and there is a shit respray job done on the top of the doors. There is a bit of overspray and some paint coming off. The door jams and pillars are all original, so its just panel or paint damage thats been repaired. I'm not sure its worth fixing, but I would like to stop it getting worse, so I might just lay some clear coat on it. What do you think?

The first two pics are damage I did when I bumped it with my polisher, it just ate through. You can see some of the over spray in the third pic, but theres more than that.

20180109_163734.jpg

 

20180109_163728.jpg

 

20180109_163723.jpg

 

20180109_163716.jpg

 

 

 

 

Hi Prank, congrats on the purchase!

Like you, I’ve recently wandered into BMW ownership with an E90 320i.

Your right about the runflats, I’ve had the same experiences with them. Luckily the previous owner only just replaced them because I will not be buying them when the time comes around, I just can’t justify the price!
You can get runflat “repair” kits(previous owner got one)but it’s not advisable to do so haha

Hi Prank, congrats on the purchase!

Like you, I’ve recently wandered into BMW ownership with an E90 320i.

Your right about the runflats, I’ve had the same experiences with them. Luckily the previous owner only just replaced them because I will not be buying them when the time comes around, I just can’t justify the price!
You can get runflat “repair” kits(previous owner got one)but it’s not advisable to do so haha


Oh I'm happy that you're hating then too (well not happy but relieved) because I was starting to worry about suspension components.

Are you loving the E90?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...