Jump to content
SAU Community

R34 gtt Build both street and track

ROM10

By ROM10,
in Motorsport Builds

 Share

Recommended Posts

ROM10 Rookie

ROM10

Posted
  • Author
Posted
14 hours ago, NEO25T said:

Looks good would be interested to hear the specs of the motor

Thanks man, off the top off my head

-Forged internals

-Spool conrods with arp bolts, spool oil pump gears

-Cometic head gasket, arp head stud kit 

-Machined block, head and crank, with aftermarket cams and gears, timing belt kit, water pump, welsh plugs, 

-New aftermarket intercooler and alloy radiator, hose kit

-Mantic Heavy single clutch stage 5 (i think) and flywheel with arp bolts

-recondition r34 gtt NEO  transmission

-r33 gtr 2-piece tail shaft and drive shaft,  forgot what diff housing because we tried so many lolll,  but ill have to double check , it has z32 internals with new bearings

-New 6 boost manifold and inlet, 1300cc injectors, MTA GT35/40 turbo 0.63 R/H with and full 3inch custom exhaust

- New Link G4 EC, N1 oil pump, new fuel system with pumps and tanks

 

thats all i can think off the top of my head :)

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Hello Liam - HA - somewhere in flies - possibly I have an update, but I have been so busy, projects have taken a back seat to getting business back on track.  I will let you know the outcome, but I think I am going to go for the 8HP,  CHEERS.  ELVIS
    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Thanks Joshuaho96, yes - as someone else also suggested, the 8HP seems the 'smart choice' - HA - and ZERO to do with cost, but I am sure 8 speeds will be better than 6 speeds - HA - maybe.  I will purchase a new 8HP,  Thanks.  ELVIS.
    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Nobody said anything about getting a "...cheap Falcon box..."- it was JUST a question about a specific transmission.  And YOU may have a problem with not enough $ - HA - I do NOT - so please keep your comments like you are some financial guru to yourself.  BUT - much appreciated re the cost of a new 8HP and I twill probably be the way I go.  Thanks.  ELVIS.
    • joshuaho96
      ZF 6HP26 to RB30 block

      By joshuaho96 · Posted

      Most people I know in the BMW world are swapping 6HPs for 8HPs. The 6HP has a big issue with one of the clutch drum bushings wearing out shockingly early which leads to them going into limp mode going into 5th/6th gear as the oil pressure loss from the worn bushing causes clutch slip. Even with the adaptations in shifting the TCU can't bump line pressure enough to keep the clutches from slipping and burning. I've personally looked at a 335d with 6HP28 with one owner and ~90k miles on it and the transmission adaptations were way out of spec and even though it nominally drove ok I'm confident it would have needed a full rebuild sooner than later. Other than that they're fine, but the 8HP doesn't really have weird issues like this to my knowledge and they're in everything these days so pulling them out of crashed cars isn't too hard.
    • joshuaho96
      R34 GT-T cycling ABS pump

      By joshuaho96 · Posted

      There is an ABS pump and a few solenoids. You could trigger the front/rear solenoids with a pressure bleeder attached with a Consult 2. 
×
×
  • Create New...