Jump to content
SAU Community

Recommended Posts

Selling my project that I just don't have time for and interests have changed. Project will need time to be put back together, but almost everything is there.

Body & Interior:
Skyline R34 GT-T Coupe with Sunroof
Freshly painted late 2017 in QM1 Polar White (windows out and in job), was black and now white.
Nismo body kit front bar, rear bar, side skirts all genuine
Both Guards
Bonnet
Boot Lid
Doors
Brand new genuine Xenon Headlights
Heaps and heaps of interior parts and spares (3 x center consoles, 4 front seats, 10+ door cards etc)
Brand new GT-R V-Spec Center Console Trims - Ash Tray, Radio Surround, gear shifter surround (gold brushed finish)
Brand new GT-R MFD display trim/cover

Transmission:
R33 GTS-T Turbo Manual Gearbox
Heavy Duty Clutch
Nismo Lightened Flywheel

Engine:
RB25DET Neo engine
Full reconditioned head, valve seals replaced, decked
Welsh plugs replaced
Freshly rebuilt
Block deburred
Manley Forged Pistons bored to 86.5
ARP 2000 Head studs
ARP 2000 Main Studs
ACL Race Bearings main & rod bearings
Permaseal MLSR Headgasket
NPW Water Pump
ASR Extended Sump
ProFlow Fuel Rail

What else may be needed to complete it:
Exhaust - planned for custom exhaust when build was finished
Turbo
Exhaust Manifold
Maybe small little nit picks like spark plugs etc.

Have tonnes of spares for the car new and used bits and pieces, too much to list. Buyer will get everything I have left for Skylines. The shell will need to go through compliance and I have the paperwork for it.

Looking to sell the lot for $15k. Will sell individual stuff if the shell sells on its own. after $2k for the shell and all panels. Pick up Western Sydney. May need a van to pick up all the other bits and pieces. Over $25k spent to date.

 

What it sort of looks like now (with boot lid)

7D2_4495.jpg

Forged Rods with ARP 2000 Main studs

7D2_6511.jpg

Forged Pistons

7D2_6517.jpg

7D2_6524.jpg

7D2_6531.jpg

96935-AA410.jpg

Fresh home from the paint shop

20171109_134334.jpg

Block Deburring - before

Engine Block Prep 1.jpg

Block deburring - after

303599899_EngineBlockPrep2.thumb.jpg.b0ca2f319ab2e97040c3b30e2f1cd548.jpg

ARP 2000 Head studs, MLSR head gasket

IMG_3016.jpg

Fresh reconditioned head

IMG_3020.jpg

IMG_3023.jpg

IMG_3024.jpg


When I bought the project

IMG_9365.jpg

IMG_9367.jpg

  • Sad 1
  • 4 weeks later...
  • 1 month later...
On 9/9/2018 at 7:06 PM, UNIQ33 said:

Is the shell still for sale 

sorry for late reply, it is. send me a PM, your inbox is full

  • 4 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...