Jump to content
SAU Community

Recommended Posts

Hi All,

recently fitted a new engine into a shell. I purchased the shell and have never heard a motor run in it so not sure if a wiring issue or what, could be a big fan of worms! ?The motor cranks but won’t start. Not running on any cyl. I have checked for fuel and lines are correct (see pic) Also what should the tomei fpr be set to? Has standard injectors fitted. Is there a way I can bypass the ecu or link to ground the injectors? Also should the apexi ecu have a bracket to be grounded or does it ground through one of the pin outs?

 

Have turned the ignition on and removed CAS and spun by hand. Can hear the injectors clicking and have spark from all coils. Also it has an apexi power fc fitted so is there a way of testing that this is working? Also so have the afm connected and was reading about 400mV or there abouts.

Not sure if it’s an immobiliser related issue either, pulling my hair out just trying to get this motor to start! Any help is much appreciated!

image.jpg

image.jpg

First is current one on car which was from the running motor (previous)

 

Second pic is from the current motor I’ve fitted but I removed it because it was a bit tight the bearing and when you spin it by hand it’s a little notchy.

image.jpg

image.jpg

This is what the fpr is doing. Could this be the issue?

Also what is the regulator that’s connected to the return line of the fuel under the brake booster? I don’t have one fitted.

Sorry about lines being a mess

image.jpg

Is it running the same AFM as the last car the Power FC was fitted to? Same injectors?

Have you had a read of PaulR33's Power Fc FAQ?

Im betting if you have fuel and spark then its probably a setting not quite right

Are you getting spark to the spark plugs? Perhaps do the old screw driver into coil and cam cover trick.

When you turn the CAS or crank the car it should spark.

Also take out your spark plugs and see if they're all fouled and cooked.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...