Jump to content
SAU Community

Recovering rear GTR seat

tridentt150v

By tridentt150v,
in Exterior & Interior Styling

 Share

Recommended Posts

tridentt150v Grand Master

tridentt150v

Posted
Posted

I have an R33 GTR seat set, 2 x front and rear bench.  I think they are out of a '96, they have the mauve/purple inserts in the headrest.

The top part of the rear seat was sun affected [ie faded and UV weakened/rotted] so I took it to a local upholstery business and it has languished there for a few months now.  They can't seem to find the grey brushed velour [not the centre inserts, we will be able to re use them] that is endemic to nearly every model.  So I am looking for a supplier that can sell me 3 metres of this material so I can get the seat finished.  Ideally I would go to some other business that can do the job but this would mean a long trip cos I live in a small town in the country, Sydney is 4 hrs away, Canberra is 2.  Plus I feel that if I can find the right material then the upholsterer should be able to do the job [surely its not that difficult].

So does anyone know of code numbers I can ask about [okish], or a supplier [better]?

TIA

Link to comment
https://www.sau.com.au/forums/topic/474930-recovering-rear-gtr-seat/
Share on other sites
Robocop2310 Experienced

Robocop2310

Posted
Posted

Hey mate, I too had similiar damage to my rear seats. It will cost too much to get them fixed and chasing a perfect colour match will be difficult. I would suggest you looking on eBay, Gumtree and the Sales section of this forum to buy used seats and just replace them that way. 

Cheers,

tridentt150v Grand Master

tridentt150v

Posted
  • Author
Posted

lol....the fabric is available, I've had a section redone before [albeit around 10 years ago].  And the seats are going in my Gtst.  Buying used will turn up the same issue, all the rear seats fade across the top.  The rear window glass just lets that sun in big time!!!

I also have a set of genuine factory leather seats out of a SIII '98 R33 GTR that I've had refurbished [still have to remove and recoat/powdercoat the carriage to finish].  But was hoping to get the grey velour ones sorted as well.  leather is OK in the winter but burns like f#*k in the summer ?

 

Robzilla32 Mentor

Robzilla32

Posted
Posted

I cheated and bought ridiculously expensive Nismo covers as the stitching kept bursting and material fading.

In some ways, I would love to keep the stanard R32 look but *every* time I get out of the car, the jeans on my fat arse rip the bolster

  • Haha 1
Robocop2310 Experienced

Robocop2310

Posted
Posted
13 hours ago, Robzilla32 said:

I cheated and bought ridiculously expensive Nismo covers as the stitching kept bursting and material fading.

In some ways, I would love to keep the stanard R32 look but *every* time I get out of the car, the jeans on my fat arse rip the bolster

Can you post some photos of these "ridiculous expensive Nismo covers"? 

Robocop2310 Experienced

Robocop2310

Posted
Posted (edited)
6 hours ago, Robzilla32 said:

Sample pic

 

img87900-rnr20-1.gif

 

They actually look quite very nice. Where did you get them from?

Nengun Performance has them for a crazy $1,700 plus postage. Wow.

https://www.nengun.com/nismo/seat-cover-set-skyline-gtr

 

Edited by Robocop2310
tridentt150v Grand Master

tridentt150v

Posted
  • Author
Posted

Those covers look very schmick Rob, but - to me - its like hiding rust with new paint.   And I can't afford $1700.  The material I want will cost much less than that, but just have to find the right knowledgeable person to help me source a supply.

  • 2 weeks later...
Robocop2310 Experienced

Robocop2310

Posted
Posted
2 hours ago, tridentt150v said:

Still trying, still asking?

Give these guys a call. A mate of mine had a friend that had his seats repaired by these guys and he seemed happy. I have never used them personally but have  chat with them and let us know how you go.

https://www.gumtree.com.au/s-ad/revesby/other-automotive/car-seat-upholstery-repair-sydney-leather-car-seat-repair/1101453969

  • 1 month later...
CU's GTR Contributor

CU's GTR

Posted
Posted

You can get new seat covers made. They will make it to suit the new seat and they stitch it into the existing seat so they won't move. Just got mine done, however I'm in Melbourne.
The ones you posted from the website is a cover. You need to dismantle the seat and insert the cover on each section of the seat.
The one RoboCop sent the link through will custom make the covers and will do the same. Dismantle stitch into the existing seat so it doesn't move.

Robocop2310 Experienced

Robocop2310

Posted
Posted
3 hours ago, CU's GTR said:

You can get new seat covers made. They will make it to suit the new seat and they stitch it into the existing seat so they won't move. Just got mine done, however I'm in Melbourne.
The ones you posted from the website is a cover. You need to dismantle the seat and insert the cover on each section of the seat.
The one RoboCop sent the link through will custom make the covers and will do the same. Dismantle stitch into the existing seat so it doesn't move.

Who did you use mate and can you please post some pictures? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      Yea that’s why I said ima test them with multimeter and see the reads.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      Only at idle. Isn’t a problem when rev it seems.
    • Murray_Calavera
      RB25DE NEO with Haltech ECU

      By Murray_Calavera · Posted

      @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...