Jump to content
SAU Community

Recommended Posts

Hi All,

I'm hoping some of you can answer my non car related electrical questions.

I have a large fish tank which needs power to some components 24/7. I've thrown around the idea of buying a generator in the past but the need to be on my property when power goes out threw that out the window.

Now I'm thinking about a battery and trickle charger with an inverter in an attempt to ensure uninterrupted power for my pumps.

So, in my head, I'm thinking this;

3 pumps in my tank that I need to run are about 200w total (thats about 60w bigger than actual, but I'd like to over estimate than under.)

A 50AH deep cycle battery will run these pumps quite easily for 24hrs.

A 300w inverter will allow 240v access to the batter.

A good ol' trickle/maintenance charger will keep the battery charged. 

Power outage means that the fully charged battery will take over.

Is that sane? Am I missing anything? It seems too easy.

I guess the only thing I am really wondering about is maintaining the health of a battery when it is charged at 100% for 99% of the year. Should I make it work every month? Switch off the mains to it to force it to cycle? 

Would love any help.

Thanks,

Christian

 

What you're talking about is effectively a UPS - which you could look at instead of a cobbled together bunch of bits.

The other thing you could do is work out if the tank can run for a length of time only say, only 1 of the pumps.  So when you have the rare power failure that you're protecting against, would the single pump keep it going for 3 hours?  12 hours?  2 days?  By rationalising how much stuff you need to keep going for a (short) time, you can either use a smaller power setup or get more run time for your capacity.

I looked at UPS options but found they were quite prohibitive in cost when trying to run these pumps for up to 24hrs.

So, 200w is what I'd like to run and my calculations have a 50ah deep cycle battery capable of running this for over 24h. That battery is only about $200 and the inverter only another $100. But that seems cheap and I'm worried I'm missing something.

 

The biggest issue is that, as you suspect, you have no charge management in your proposed system at all.  And the thing will always be running both the charger and the inverter, so you will always be using a lot more power (due to all the inefficiencies stacking up) than if you just ran the pumps off the wall.

The next problem is that you seem to have a problem with your expected battery capacity.  If you want to pull 200W off of a 12V battery, then you will be pulling 200/12 = 16.7 Amps.  A 50 Ah battery will only support that sort of power draw for a few hours.  You would actually need a number of batteries that size to support your power requirement for 24 hours.  And that is probably the reason why UPSs look so expensive - because you can bypass the faulty calculation and go straight to their specs.  A typical small UPS can run 200W for only a few minutes.  That's using an 7Ah alarm battery.  If you want to support a typical 200W PC for 6 hours then you're looking at a UPS that will cost a couple of grand and will have at least 8 or maybe 12 of those batteries in it.  And it will be the size of a large PC case.  If you want to run for 24 hours, now you're looking at something the size of a small filing cabinet.  That's also how large a stack of car batteries would need to be.

Can you not have a generator set up to start when the mains power is off (and vice versa)?

Generators are not that expensive:

https://www.ebay.com.au/itm/GenTrax-Inverter-Generator-3-5KW-Max-3KW-Rated-Portable-Silent-Camping-Petrol/153040875857?epid=14022448432&hash=item23a1f27151:g:5VAAAOSwwNtbem2v:rk:12:pf:0

The relays to start and stop it should not be that hard (too hard for me but not some electronically able person).

17 hours ago, GTSBoy said:

The biggest issue is that, as you suspect, you have no charge management in your proposed system at all.  And the thing will always be running both the charger and the inverter, so you will always be using a lot more power (due to all the inefficiencies stacking up) than if you just ran the pumps off the wall.

The next problem is that you seem to have a problem with your expected battery capacity.  If you want to pull 200W off of a 12V battery, then you will be pulling 200/12 = 16.7 Amps.  A 50 Ah battery will only support that sort of power draw for a few hours.  You would actually need a number of batteries that size to support your power requirement for 24 hours.  And that is probably the reason why UPSs look so expensive - because you can bypass the faulty calculation and go straight to their specs.  A typical small UPS can run 200W for only a few minutes.  That's using an 7Ah alarm battery.  If you want to support a typical 200W PC for 6 hours then you're looking at a UPS that will cost a couple of grand and will have at least 8 or maybe 12 of those batteries in it.  And it will be the size of a large PC case.  If you want to run for 24 hours, now you're looking at something the size of a small filing cabinet.  That's also how large a stack of car batteries would need to be.

Wow, I totally mis calculated my requirements. Suddenly the cost has blown right out. Thanks for putting me straight, I would have been pissed if I bought everything based off my calculations only to find I had a few mins of power! haha

16 hours ago, KiwiRS4T said:

Can you not have a generator set up to start when the mains power is off (and vice versa)?

Generators are not that expensive:

https://www.ebay.com.au/itm/GenTrax-Inverter-Generator-3-5KW-Max-3KW-Rated-Portable-Silent-Camping-Petrol/153040875857?epid=14022448432&hash=item23a1f27151:g:5VAAAOSwwNtbem2v:rk:12:pf:0

The relays to start and stop it should not be that hard (too hard for me but not some electronically able person).

Ok, this does seem like a good option but how on earth do you start a pull-start generator with relays?

Ok sorry,  didn't look too hard at the generator but there are electric start versions about...

Many buildings have emergency generators set up to start automatically in a power outage so the technology must be fairly common. Obviously you only need a small version but the principles should be well understood.

  • Like 1
13 hours ago, KiwiRS4T said:

Ok sorry,  didn't look too hard at the generator but there are electric start versions about...

Many buildings have emergency generators set up to start automatically in a power outage so the technology must be fairly common. Obviously you only need a small version but the principles should be well understood.

Yeah, this guy looks pretty good. I wonder what the range is on the keyring starters! ?

https://www.ebay.com.au/itm/GenTrax-Inverter-Generator-3-5kVA-Remote-Electric-Start-PureSine-Portable-Petrol/292370091074?epid=6007499700&hash=item44129d8c42:rk:1:pf:0

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well it wasn't as easy as I thought.... and it also wasn't in my original manual which I did end up finding. They discuss the process in the Nismo catalogue though and it requires slight machining. Page 145.  NISMO PARTS CATALOGUE 2020
    • I'm an idiot, my intercooler is rated for 1000hp. I had clicked on the wrong product. Knowing the delta P would be nice, but I'm doubtful I'll do it. Now as for an EMAP, that would be great and I'll get around to it eventually but from my findings in my last post, I'm considering a turbo swap now. 
    • You sir, big win tonight. Precision never supplied compressor maps in the past and Idk when they started, but it seems they only offer for a few of the older gen2's which is exactly what I have. I punched in some numbers and seem to have gone with the wrong turbo. 600-700whp isn't in the most efficient area and is close to the choke line. 800whp is well off the map. Punching the numbers into a 68mm gen2 turbo map is bang on in the center. Here I was thinking going smaller would shift the power band down, but in reality it would just make it so much worst due to my rev limit. I would have never thought. 
    • Increasing overlap will bring the torque down earlier (and make your idle sound sick lol). Worth a shot (if you dyno time) to experience a bit (providing you are confident your valves won't kiss your pistons). Is to just take off 5 degrees across the boosted area of the map, and then retard the exhaust cam let's say, 3 degrees at a time and then overlay all the runs with VCT on all the way and VCT off as soon as you make positive pressure. Ideally you would have a total of 6x overlays to looks at 0 exhaust & VCT off once manifold pressure is +ve 0 exhaust & VCT on all the way -5 exhaust & VCT off once manifold pressure is +ve -5 exhaust & VCT on all the way -10 exhaust & VCT off once manifold pressure is +ve -10 exhaust & VCT on all the way Just leave your O2 wideband closed loop on for all of the boost area & RPM, and hopefully there isn't too much fuel correction needed and the Haltech is fast enough to compensate (I do this, then apply the correction to the main table). Getting that overlay data should give you a good indication of what to aim for.
    • So, my main limitation here is that the car does not have an oil pressure sensor by default, just a switch. As part of my tune I bought an oil pressure sensor upgrade so I now have access to oil pressure levels and logging rather than just the boolean behaviour of the switch but this means I need to use the tuning app to display this value. So, this rules out using any other app on the iPad. The app will also flash when pressure drops which is a nice feature. I have replaced the centre screen with an Android one, which is awesome for Android Auto, but I think it might be too far away and out of my line of sight. I might add some gauges to it this weekend and just see. I guess if its just temp and oil pressure I can make them massive! 🤣  
×
×
  • Create New...