Jump to content
SAU Community

R33 Fix or Sell?

Blakeo
 Share

Recommended Posts

Blakeo Rising Star

Blakeo

Posted
Posted

Hi guys, I am after some advice with my 33. I have been having thoughts on selling it as I only am able to drive it every couple of weeks. I don't feel like the engine is going to last much longer with being on e85 and running 400rwhp. And if the motor goes I am looking at least ~$12K to rebuild it properly. At the moment it looks like the motor is leaking oil from the head gasket on the exhaust manifold side. There is oil higher up but it looks like majority of it has pooled near the head gasket. It needs another timing belt kit in about 20,000km but I may do it sooner than that as last time I did it was 3 years ago. Also has rear main seal leak, sump is leaking and I believe the gearbox needs to be rebuilt as it is notchy into second gear and can't always get first gear in it.

I have put about $8-10K into the car in my ownership, with the turbo, exhaust, fmic, afm, coilpacks, fuel pump and multiple dyno tunes. At this point it really needs a new ECU as I'm not happy with the blow-thru setup on the car at the moment. 

I believe I'd need to put at least $20k into the car to get it where I want it to be and I don't think its worthwhile. What are your guys thoughts?

Link to comment
https://www.sau.com.au/forums/topic/477060-r33-fix-or-sell/
Share on other sites
admS15 Grand Master

admS15

Posted
Posted

400whp on e85 is a walk in the park for an RB25. Your oil leak is more likely to be from the rocker cover gasket or half moon seal rather than head gasket. Rear main and oil pan gasket, theres quite a few hours of labour there.

Gearbox rebuild is around 2k, new box is around $3200 or you can just refill it with redline oil which will make it feel better.

I don't know why you'd want to rebuild the engine if oil leaks are the the only issue. I can understand if you have real low or uneven compression or some other serious problem.

My own rb25 has been making 420 rwhp on e85 for a few years now. Done over 30 track days where it gets completely flogged. Compression is still really good, i recently had the head off, everything looked in good knick, could still see factory hone marks on bores. Valves and guides where in great condition, as was the 23 year old head gasket. The only thing that wasn't great was one of the valve stem seals. IMHO if it aint broke dont fix it.

If you really want an engine, there is an Sau member selling a forged rb25 for 3k.

I suppose it's up to you how much you like your car whether it's worth it or not to get it back up to scratch. Personally i wouldn't be rebuilding unless i really had to or was aiming to increase power substantially.

  • Like 3
Link to comment
https://www.sau.com.au/forums/topic/477060-r33-fix-or-sell/#findComment-7905496
Share on other sites
Blakeo Rising Star

Blakeo

Posted
  • Author
Posted
18 hours ago, admS15 said:

400whp on e85 is a walk in the park for an RB25. Your oil leak is more likely to be from the rocker cover gasket or half moon seal rather than head gasket. Rear main and oil pan gasket, theres quite a few hours of labour there.

Gearbox rebuild is around 2k, new box is around $3200 or you can just refill it with redline oil which will make it feel better.

I don't know why you'd want to rebuild the engine if oil leaks are the the only issue. I can understand if you have real low or uneven compression or some other serious problem.

My own rb25 has been making 420 rwhp on e85 for a few years now. Done over 30 track days where it gets completely flogged. Compression is still really good, i recently had the head off, everything looked in good knick, could still see factory hone marks on bores. Valves and guides where in great condition, as was the 23 year old head gasket. The only thing that wasn't great was one of the valve stem seals. IMHO if it aint broke dont fix it.

If you really want an engine, there is an Sau member selling a forged rb25 for 3k.

I suppose it's up to you how much you like your car whether it's worth it or not to get it back up to scratch. Personally i wouldn't be rebuilding unless i really had to or was aiming to increase power substantially.
 

Who is selling the forged 25? Is he w.a member? 

Link to comment
https://www.sau.com.au/forums/topic/477060-r33-fix-or-sell/#findComment-7905536
Share on other sites
admS15 Grand Master

admS15

Posted
Posted

Vic member. In this post here, last quarter of the list.

https://r.tapatalk.com/shareLink?url=https://www.sau.com.au/forums/topic/476651-fs-r34-coupe-other-parts-garage-sale/&share_tid=476651&share_fid=62372&share_type=t

FS: r34 coupe + other parts garage sale

Link to comment
https://www.sau.com.au/forums/topic/477060-r33-fix-or-sell/#findComment-7905539
Share on other sites
7amooda.007 Apprentice

7amooda.007

Posted
Posted

Man tough call honestly, I mean you like the car and I know this from the time/money spent on it from your side.

I say study it well and see whats ur best options.

I'm afraid from your situation that one day I wake up and say I dont want my R34... [emoji26]

I say do a proper diagnosis of the engine and take it from there. Best of luck.

Link to comment
https://www.sau.com.au/forums/topic/477060-r33-fix-or-sell/#findComment-7906135
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...