Jump to content
SAU Community

Help me with my r33 gtst


Recommended Posts

Guest Slide

Somebody help me!!!!!!!!!!!!!!!!

I have taken my R33 to a number of stupid so called specialists and they have all given me different answers which have cost me nearly $2000.

On standard boost (7psi) it runs like new ,Anything over (i mean even 1 psi over) it pops not detonates. it sounds like it is backfiring.

it looses boost and it sounds like it is just feeding it out the exhaust. verrrry embarassing.

sound like it is farting. I am using a turbosmart dual stage boost controller (tried a different 1 already) 750hp fuel pump, ngk irridium plugs,fuel lines, injectors have been cleaned ,3'' turbo back exhaust, pod filter ect. I have tried tripping the computer did not fix.

Help Help Help (eeeger to run more boooost) i feel like popeye without spinach

Link to comment
https://www.sau.com.au/forums/topic/47752-help-me-with-my-r33-gtst/
Share on other sites

Sounds like boost cut to me.

How are you measuring boost? Boost cut happens at about 10psi or a bit over. The symptoms match pretty much exactly what you described.

You could get a boost cut defender but you're better off getting a full ECU replacement.

Guest Slide

anything after 7psi confussed everyone i sent my car to

people have said to me the following with reports.

1:change computer

2:change bov(i am still using factory plum back)

3:change boost actuator

4:change plugs (so i did)

5:fuel pump (so i did)

6:have injectors cleaned(they were left to recirculate for 13 hours)

have tried using tape over the coil packs to avoid shorts from faulty coil packs.

i have taken it to 2 places where i have said i am not paying unless it is fixed came back and they both said cant help you.

Someone please give me an answer.

I am a Gold Coast local.

Anyone know anything

If someone knows a servicer around my area please post

  • 1 year later...

funny, i always thought my car was spiking, but the symtops you show are exactly what im experiencing???, so its missing big time.

Im havnig the exact same problem mate!, anything over stock 7psi (or 1/2 way on the stock gauge), will start missing, feels like 100 times a second, and yes fartings a good word:)

just wondering if you've overcome the issue yet? do i really need a safc???

I think Robo is onto something... you need to get it dynoed and post up the A/F ratios etc... my bet would be its just running extremely rich and blowing out your spark... remember the closer you gap your plugs the weaker the spark gets (may help you fix the problem in the short term tho)

other than that if you reckon it is losing boost could you just have a boost leak somewhere that only become apparent when you go over 7psi?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...