Jump to content
SAU Community

Recommended Posts

Interior Bits
All Parts in silver, in pretty decent condition. Only changed as I wanted to change the lot to black to match other interior bits.

Stereo Surround - $20
Dash Vents - $30
Climate Control unit (works perfectly): $200
OEM DIN Pocket slot: $50
Auto Shifter Surround: $25 (DOES fit with a manual conversion without fouling).

Triple Gauges (aftermarket Oil Temp, Water Temp, Boost). The text here lights up blue and pink/red as in the terrible photo from a video on this ad.
Comes with stock gauges as well if you prefer: $250 for all gauges/surround.

Oil/Water Heater and Thermostatic (80C)Sandwich plate for R34 Skyline, or any RB25DET - No Leaks, working perfectly. Works perfectly for an oil cooler, or the OEM part works perfectly if you have an old/corroded item! $50

Stock Intercooler pipes (engine side), intake, bov, and heater hoses (R34 GTT) $50 for everything in that photo

R34 Fuel pump and hangar. Working fine, removed from stock car. $50

Sony Single DIN Head Unit with Nissan Plug (R34 GTT). Useful if you want to replace the standard stock unit it you for some reason have one. Does not have BT - Has an awesome authentic AUX port and CD option. $25.

R34 Nissan Skyline AC Aircon Compressor. Working fine, only removed because of an Engine conversion and wouldn't bolt to the new engine. $100

R34 GTT Starter Motor. Starts. Has started for awhile. What else could you want a starter motor to do? $70

Nissan Skyline R34 GT/GTT R34 Indicator Stalk - Works fine, bought just for testing and turns out it wasn't the indicator stalk that was the problem. $30.

Bosch IACVBosch IACV / Idle air control valve. Worked great, incl plugs and resistor. Had this retrofitted to a Nissan Skyline RB25DETNEO motor to take over from the crap stock one that fails and costs $700 to buy.  No longer have said motor, so this is up for sale. Works great. Way better than the OEM item if you go anywhere near a track and get things hot.  $60

RB25DET Clutch Fan and Hub Near new (i.e not 20 years old, something like 2000ish km) fan and fan hub for RB25DET/RB25DET Neo. Still has Nissan stickers on it. Bought it a few months ago and then sold the motor it was attached to. Works perfectly, kept engine nice and cool under 20+ minute track abuse sessions. $250

Whiteline 24mm Front and Rear Sway BarWorks entirely OK. Trimmed one side of the softest setting to actually fit on a R34 though it's supposed to fit them from Whiteline. This thing is strong and stiff as hell and like me you will probably ignore the "Suitable only for race track warning. I hit a kerb once at the track and it broke the knuckle and the bar was entirely fine. Could use a lick of paint. Comes with spare bushes that I bought but never needed. Front and Rear included. Removed as didn't fit after an engine swap. $300 for both.

R34 GTT RB25DET NEO Engine Cover (Series 2) Comes with the coilpack cover $50

Happy to post if need be or pick up.

IMG_20190728_162640.jpg

IMG_20190728_160139.jpg

IACV 1.jpg

Fan 2.jpg

IMG_20190728_160739.jpg

 

IMG_20190728_160526.jpg

Indicator Stalk 1.jpg

IMG_20190728_163214.jpg

IMG_20190728_160208.jpg

Starter Motor 2.jpg

IMG_20190728_162014.jpg

IMG_20190728_161800.jpg

IMG_20181105_144600.jpg

IMG_20190728_162516.jpg

 

Link to comment
https://www.sau.com.au/forums/topic/477979-r34-gtt-parts-mostly-oem-junk/
Share on other sites

  • 2 months later...

For any future searchers, all of the above is now sold except:

Interior Bits
All Parts in silver, in pretty decent condition. Only changed as I wanted to change the lot to black to match other interior bits.

Stereo Surround - $20
Dash Vents - $30
Climate Control unit (works perfectly): $200
OEM DIN Pocket slot: $50
Auto Shifter Surround: $25 (DOES fit with a manual conversion without fouling).

Triple Gauges (aftermarket Oil Temp, Water Temp, Boost). The text here lights up blue and pink/red as in the terrible photo from a video on this ad.
Comes with stock gauges as well if you prefer: $250 for all gauges/surround.

R34 Fuel pump and hangar. Working fine, removed from stock car. $50

Sony Single DIN Head Unit with Nissan Plug (R34 GTT). Useful if you want to replace the standard stock unit it you for some reason have one. Does not have BT - Has an awesome authentic AUX port and CD option. $25.

R34 GTT Starter Motor. Starts. Has started for awhile. What else could you want a starter motor to do? $70

Nissan Skyline R34 GT/GTT R34 Indicator Stalk - Works fine, bought just for testing and turns out it wasn't the indicator stalk that was the problem. $30.

Bosch IACVBosch IACV / Idle air control valve. Worked great, incl plugs and resistor. Had this retrofitted to a Nissan Skyline RB25DETNEO motor to take over from the crap stock one that fails and costs $700 to buy.  No longer have said motor, so this is up for sale. Works great. Way better than the OEM item if you go anywhere near a track and get things hot.  $60

  • 4 months later...
On 10/4/2019 at 8:05 AM, Kinkstaah said:

For any future searchers, all of the above is now sold except:

Stereo Surround - $20
Auto Shifter Surround: $25 (DOES fit with a manual conversion without fouling).

It's a bit late, but are these two still available?

@jrm They sure are! Shoot me a PM with details if keen.

Still have everything listed, all boxed up away from the elements etc ?

  • 2 years later...
  • 10 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...