Jump to content
SAU Community

Rb25- Mating the Engine to Transmission?

Dil-Dog
 Share

Recommended Posts

Dil-Dog Collaborator

Dil-Dog

Posted
Posted

So my mechanic and i was wondering if its possible to put back the rb25 engine in my R34 Skyline with the transmission still in the car... Asking because to drop the transmission is alot of extra work and we wanna know if they can be mated together when they are both in the car. I cant find any example or video on any forum or on youtube... only seeing guys who mate them out the car and THEN put it back in all at once. If anyone has done this before please let us know! Thanks

-Dylan 

Duncan Grand Master

Duncan

Posted
Posted
17 minutes ago, Ben C34 said:

....Install is reverse of removal.

lol just like the workshop manual says.

the only things worth mentioning are dropping the rear of the gearbox by lowering (but not removing) the gearbox cross member bolts, will make getting to the top bolts much easier (either from above, or by using a set of long extensions while standing at the rear of the gearbox), and of course the engine has to be on the exact sample angle as the gearbox/input shaft when you get to the last couple of cm.

BTW I hope the mechanic is mates rates if they needed to get you to ask this...

  • Like 1
Dil-Dog Collaborator

Dil-Dog

Posted
  • Author
Posted

Thanks for the advice guys, and yes the gear box is still in the car and the engine is ready to go back in.... we were wondering how hard it was (if possible) to mate the gear box and engine in this pariticular case rb25 in an r34 . But from what i am understanding from you guys is that yes it is possible @Duncan @Ben C34

Dil-Dog Collaborator

Dil-Dog

Posted
  • Author
Posted

Okay guys... thank you all very much we were just concerned as SOMTIMES it can  be impossible depending on the car and its space available in the engine bay. Still learning everyday its also my first time and my first build ?? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So, before putting them in I need to understand the stock ride height. This is how I measured it: First, check the diameter of the wheel's centre cap, it was 52mm. Then put a piece of masking tape approximately across the centre and measure 27mm (half) from at least 3 sides to get a reasonable idea of the centre of the wheel cap. Mark that with a horizontal line as one measuring point. Then, directly above the wheel on the guard, put another piece of masking tape in approximately the centre. Use a string line to find out the point on the guard above the centre of the wheel cap and mark that. Then it is simple, just a tape measure to check the distance from centre of the wheel to the centre of the guard. Final results where  LF: 381mm RF: 379mm LR: 401mm RR: 400mm Pretty even considering they are 120,000klm old factory springs, lets call that 380 front and 400 rear.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So....knowing that I have a problem with power steering temps on track and another Wakefield day booked in next Friday, I've done the obvious thing They are very reasonably priced at $1650, considering they are a big monotube shock, double height adjustable (don't have to change pre-load to change ride height), one way adjustable damping and standard sized and customisable springs if you want something other than what comes with them. They come with 9kg/mm front and 4.5kg/mm front and I went with that as a starting point because I'll add adjustable sway bars too https://justjap.com/products/bc-racing-coilover-kit-ds-ds-infiniti-q50-v37-14-current#description Unfortunately they didn't come with rear strut tops so I've re-used the factory ones which was a bit of a pain. Also, the adjuster for the rear shock will be an absolute nightmare to get at, and while there are extensions in the kit I can't see any way you can actually attach or use them
    • Duncan
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By Duncan · Posted

      I also had 2 bulbs blow at once, years ago in the stagea. made for a fun drive home. The issue was the voltage regulator had failed in the alternator and it was giving 15+ volts. Really, I was lucky all that was fried were the headlight bulbs. So, I'd suggest you check the voltage across your battery terminals with the car running and warmed up. Yes, you will need a multimeter to do so, sorry.
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      Good work to think to check that, and thanks for coming back to post up the outcome.
    • Duncan
      98 R34GTT 4k engine stumble

      By Duncan · Posted

      Given it happened suddenly, and when you come on boost, I'd check all your inlet - hose clamps in place and no split rubber or silicone hoses. Even the hard to get to ones near the intercooler. It's possible air that went past the air flow meter is being dumped out a big hole.
×
×
  • Create New...