Jump to content
SAU Community

Recommended Posts

I have a 350 GT Nissan skyline 2003 import it is running is safe mode, I have had it to one mechanic and his computer told me it was a stepper motor fault can't find one anywhere. took it to a transmission place he had it for a week and gave up stating it stuck in third, it's a lovely car and i would love to put it back on the road but can't get it to drive any ideas    

Link to comment
https://www.sau.com.au/forums/topic/479112-50-gt-skyline-sedan/
Share on other sites

Replacement of the stepper motor in the CVT  will cost a few bucks. Probably only a Nissan dealer will have the scanner that will pinpoint the problem so pay the money for a scan. Then try to find a better auto transmission repair shop for a quote on the repair.

My local shop could do it but its in Auckland NZ.

Here's a motor if you want to have a go yourself( look around on ebay ...some of the ads have the gearbox no so see if you can find the number of your transmission. Obviously they all come freight free from China or you could order through Nissan for much more money (or get a second hand tranny - but a second hand CVT???!!!) :

https://www.ebay.com/itm/Transmission-CVT-Step-Stepper-Motor-Fits-for-Nissan-Altima-Maxima-Murano-G9Q3/184024592323?epid=11035033092&hash=item2ad8b86fc3:g:HIAAAOSwA3ddwlUt

or:

https://www.ebay.com.au/itm/Replaceable-JF009E-Motor-CVT-Step-Stepper-Motor-For-Nissan-Altima-Maxima-Murano/183887427296?epid=18033871363&hash=item2ad08b76e0:g:zAcAAOSwN2ZdLo4S

or you should be able to order it though Nissan for megabucks.

13 hours ago, GTSBoy said:

Are you sure that the stepper motor in question is part of the CVT? There are at least 2 other options. Idle control and throttle or traction control.

It could be the tranny's stepper, but if it is, it will be inside it. So....you won't find it without some spanners.

Had it on to computers now only one could connect and it said the stepper motor. I don't know what else to to do the Transmission place in Underwood is I'm told one of the best and he gave up I just thought someone must have had the same thing happen to them so I turned to this forum.  I have had the stepper motor out it's easy in this car but it's back in there so I could move the car. 

Edited by Col Shaw
add content
1 hour ago, KiwiRS4T said:

Did you read my post? Are you going to buy a stepper motor?

I did read the post they don't have the one I need they cam close with one but not the right one trust me I look and was praying they had it but no luck, have attached some shots mate if yo can do better then me I would be very greatfull.

20181224_155137 (2).jpg

20181224_155202.jpg

20181121_154634.jpg

Fair enough .

Have you had a read of this?

https://gearsmagazine.com/magazine/stop-wasting-money-on-jatco-cvt-stepper-motors/

I assume since you have had the stepper motor out you have changed the (special) cvt fluid and filter.

If you have the energy you could follow this article. test the stepper motor and clean the valve body.

Have you got a price from Nissan for the stepper motor should it be required?

30 minutes ago, KiwiRS4T said:

Fair enough .

Have you had a read of this?

https://gearsmagazine.com/magazine/stop-wasting-money-on-jatco-cvt-stepper-motors/

I assume since you have had the stepper motor out you have changed the (special) cvt fluid and filter.

If you have the energy you could follow this article. test the stepper motor and clean the valve body.

Have you got a price from Nissan for the stepper motor should it be required?

I did speak to Nissan at Northlakes but they didn't have any answers for me they said they had no information on this car it's an import so I started looking around for my self I keep getting told to give up and scrap it but I'd like to see it on road.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...