Jump to content
SAU Community

Recommended Posts

Nismo 555cc RB26 GTR low impedance, top feed injectors and GTR injector pack. Good upgrade for GTR or wire in the injector pack and they'll fit your RB20DET. Excellent condition. $450 ono. Pick up Modbury area or can post. 

20191029_181936.jpg

20191029_182127.jpg

20191029_182024.jpg

Link to comment
https://www.sau.com.au/forums/topic/479123-parts/
Share on other sites

Gktech 'dog bones' with bolts/washers to fit 324mm R33 GTR rotors onto the front of your : R32 gtst, S14, S15, Z32 and A31 Cefiro. Rotors included are quality DBA 4000 series that were recently machined. To fit this kit you'll need at least 17" rims. $300 ono. Pick up Modbury area or will post.

20191029_181746.jpg

20191029_181753.jpg

Link to comment
https://www.sau.com.au/forums/topic/479123-parts/#findComment-7918852
Share on other sites

CA/SR S13 gearbox crossmember type 'B'. This is needed when converting R32 four door or C33 Laurel to manual and might work on others. $20. Pick up Modbury area or can post.

20191030_115835.jpg

Link to comment
https://www.sau.com.au/forums/topic/479123-parts/#findComment-7919314
Share on other sites

Bendix ultimate rear brake pads DB1220 ULT to suit R32,R33,R34 Gtst & Gtr and 300ZX. Quality performance brake pads that originally cost me $140, asking $60. Pick up Modbury area or can post. 

20191106_144112.jpg

Link to comment
https://www.sau.com.au/forums/topic/479123-parts/#findComment-7919315
Share on other sites

QFM Performance front and rear brake pads DB1170 & DB1220 to suit R32,R33,R34 Gtst & Gtr and 300ZX. Quality, metallic brake pads that originally cost me $230, asking $120. These organic metallic pads are well know for their all round performance, they have excellent stopping power on the track, whilst still being good on the everyday drive by warming up quickly on the street, and they last. Pick up Modbury area or can post. 

20191106_143809.jpg

20191106_143516.jpg

Link to comment
https://www.sau.com.au/forums/topic/479123-parts/#findComment-7919316
Share on other sites

Whiteline adjustable rear upper control arm bushes, camber adjustable by +/- 0.75 degrees. Will fit: 180sx, 200sx, 240sx, Cefiro A31, S13,14,15, R32,33,34 GTST & GTR. $75. Pick up Modbury area or can post.

2019-11-06 15.57.58.jpg

Link to comment
https://www.sau.com.au/forums/topic/479123-parts/#findComment-7919318
Share on other sites

  • 2 weeks later...
On 31/10/2019 at 3:17 PM, partyboy73 said:

Nismo 555cc RB26 GTR low impedance, top feed injectors and GTR injector pack. Good upgrade for GTR or wire in the injector pack and they'll fit your RB20DET. Excellent condition. $450 ono. Pick up Modbury area or can post. 

20191029_181936.jpg

20191029_182127.jpg

20191029_182024.jpg

SOLD

Link to comment
https://www.sau.com.au/forums/topic/479123-parts/#findComment-7920316
Share on other sites

On 31/10/2019 at 3:17 PM, partyboy73 said:

Nismo 555cc RB26 GTR low impedance, top feed injectors and GTR injector pack. Good upgrade for GTR or wire in the injector pack and they'll fit your RB20DET. Excellent condition. $450 ono. Pick up Modbury area or can post. 

20191029_181936.jpg

20191029_182127.jpg

20191029_182024.jpg

SOLD 

Link to comment
https://www.sau.com.au/forums/topic/479123-parts/#findComment-7920317
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...