Jump to content
SAU Community

Recommended Posts

I'm currently in the market for upgrading the clutch and figured I'll go with a 6-puck clutch to get a bit more bite as I'm primarily going drifting. The car currently produces 500nm and I'm standing between getting either an ACT clutch (https://www.autoextreme.co.uk/act-clutch-nissan-skyline-r32-r33-gtst-heavy-duty-race-sprung-6-puk-clutch.html) or a Xtreme KNI24007-1B. I'm currently running a fullface clutch so I'm aware about that there will be more bit with a 6-puck. However, I'm wondering about ACT vs. Xtreme, I've been trying Googling but due to their generic names it's not easy.

As I'm changing the clutch I figured I might as well get a lightened flywheel and it's current standing between a Competition ultralight flywheel (steel, 5kg) or a Driftworks flywheel (chromoly, 8.5kg). 3.5kg is quite a difference but the materials are also different, which I was curious if anyone could provide additional insight to.

Thanks in advance guys :)

I cant comment on the other but I used Xtreme one with chromoly fly for good couple of years drifting with similar / more power and did the just just fine !

Dont know where you live but currently using NPC - they built a single plate to my required specs - decent $

Unless you've substantial power upgraded, any clutch will do that is not stock to a degree like what you've mentioned. Until you're going to a multiplate, whatever really. Makes more sense for twin and up as a flywheel change is a given, unlike singles.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...