Jump to content
SAU Community

Recommended Posts

what the? so you will have both banks feeding a gt42 and one bank feeding a gt30?

that is officially mental my guy. How did you come up with that? I'm all for thinking outside the square, but the square still exists.....

What engine is this for?

11 minutes ago, Ben C34 said:

Your plan for a 500kw ecotec, with a 2 turbo layout is interesting.

anymore details? Have you already turbo'd an ecotec or first time around?  It is a drag car i assume?

 

Na first time and street car low boost about 15psi high boost about 20psi

42 minutes ago, Bessel said:

What do you mean don’t get ya how can’t you?

Because....2 different sized turbos implies a sequential system. An inexperienced hobbyist setting up a sequential system from scratch sounds like hilarity. Toyota and Mazda spent millions on their systems and never really got it right.

So, I'll assume you're not doing a sequential system. I'll also assume you're not doing a true compound system, seeing as the turbos appear to be planned to be on opposite sides of the engine. And also because low boost and high boost numbers quoted appear to be about 1/4 of the values that you'd expect for compound.

So, maybe just two stage compression? In which case, the GT30 is mahoosivley oversized. Either that or the GT42 is. Well, at least one side of each of them, probably.

So, then I make a sensible suggestion of binning the additional turbo and putting an original M90 supercharger back into the Ecotec system and properly twincharge it. This actually makes a lot of sense because it will do what you suggest (fill the torque hole caused by the GT42) but.....if proper sequential is out of the question, then proper twincharging is also probably out of the question.

And all of those thoughts went through my mind prior to posting my first response, and it all seemed too hard, so I just copped out and made the post I did.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...