Jump to content
SAU Community

Recommended Posts

Before I go custom, has anyone got any intercooler plumbing to suit a GTR intercooler into R34 GTT

The typical over the radiator style, as I'm keeping the factory T/C etc

Are you expecting it to be bolt on? You'll need to do some custom work if using a GTR intercooler. Why don't you use a standard 600 x 300 x 76 intercooler for simplicity?

As it happens, last night I stumbled across a very nice R34 GTT HDI intercooler with pipes. The cooler has good strong top and bottom plates. The piping is very light and has never been in contact with a fan, so it is well designed.

Is at my bro-in-law's workshop - recently acquired with an engine package and therefore available. I have no idea what he wants for it. I can put you in touch if you'd prefer to go that way rather than trying to jam a GTR cooler in.

5 minutes ago, GTSBoy said:

As it happens, last night I stumbled across a very nice R34 GTT HDI intercooler with pipes. The cooler has good strong top and bottom plates. The piping is very light and has never been in contact with a fan, so it is well designed.

Is at my bro-in-law's workshop - recently acquired with an engine package and therefore available. I have no idea what he wants for it. I can put you in touch if you'd prefer to go that way rather than trying to jam a GTR cooler in.

If he is not interested I would be :)

On 6/12/2020 at 6:15 PM, GTSBoy said:

As it happens, last night I stumbled across a very nice R34 GTT HDI intercooler with pipes. The cooler has good strong top and bottom plates. The piping is very light and has never been in contact with a fan, so it is well designed.

Is at my bro-in-law's workshop - recently acquired with an engine package and therefore available. I have no idea what he wants for it. I can put you in touch if you'd prefer to go that way rather than trying to jam a GTR cooler in.

Nah I'm pretty set on putting in the one I have, it will be a bit of an overkill at the moment but I have always liked the GTR end tank design - more of a project to satisfy my curiosity than anything ? 

5 minutes ago, GTSBoy said:

Let me know if you want contact deets.

Could you shoot me through some pictures? I can pm my number if that will be easier? Cheers mate, oh and I'm in Perth if that would be an issue?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...