Jump to content
SAU Community

RB26 Rattle - Spun Bearing?

LiBRiUMz
 Share

Recommended Posts

LiBRiUMz Rookie

LiBRiUMz

Posted
Posted

Hey guys,

My 33 GTR is making a weird rattling noise after driving it for a while. It tends to go away after you shut the car off and start it back up again, it sounds like something is loose and rattling around somewhere on the passenger side under the intake piping for the turbos. It doesn't get louder the more you rev the car, if anything it goes away. I'm going to drain the oil here shortly and have a look for any metal shavings.

Turbos are stock to my knowledge, they were going to get changed out this winter as well as the basic oil restrictor mods, etc..I just got the car with intention of doing a restoration over the next few years.

What are your thoughts? Is this going to need a rebuild right away?

 

 

Link to comment
https://www.sau.com.au/forums/topic/481330-rb26-rattle-spun-bearing/
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted

Don't often get to say this about an rb, but that is definitely not a spun bearing.

It will be some thin gauge steel rattling against something else. Maybe a loose turbo heat shield, the air/water lines or some other random bracket not attached properly. Not a big deal but you should get it sorted so whatever isn't meant to be rattling doesn't break.

BTW I'm sure you're concerned....but 2 hours in the middle of the night was pretty early to bump the question!

LiBRiUMz Rookie

LiBRiUMz

Posted
  • Author
Posted

Sorry about that, I was definitely nervous and anxious; I tend to get that way when something could be horrible. I figured it wasn't a bearing either because it doesn't get louder or worse the more I rev it. On cold start it doesn't happen (from what I can hear), i'm going to have a deep dive next weekend and see if I can find the issue.

Thanks for the reply Duncan!! I really appreciate it.

Duncan Grand Master

Duncan

Posted
Posted

Yeah apart from the quite different tone, rod big end bearings (most common failure) are noisier when cold (thicker oil, higher clearances) and noiser when you rev it (rod moves faster, failed bearing lets it move more), and the speed of the knock increases with revs too. It is quite a distinctive "gnomes with hammers inside your engine" noise

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • foney
      Cheap Gtr For Sale

      By foney · Posted

      BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Rezz
      First time Skyline owner

      By Rezz · Posted

      Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Matt Z
      SAU NSW - Chickos Cruise

      By Matt Z · Posted

      Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • MBS206
      "Cheap" bolt on turbo on RB25DET NEO

      By MBS206 · Posted

      It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
×
×
  • Create New...