Jump to content
SAU Community

Recommended Posts

hicas is only very slight turning of the rear wheels, i think the movement is 1 degree at the most. And im fairly sure it only starts working at high speeds

I feel it every now and then, and yes it is a little scary, especially if the road isnt flat and straight

I figure whenever u wanna go fast, cut the speed sensor wire and kill 2 birds with 1 stone :) no speed limiter & no hicas

It sucks if your going to do track work.

Your trying to correct the car in a corner and the car's trying to correct you. Tug of war that results in time loss. So that's why it's recommended that you remove it for track.

I have the Tomei Lock kit, which has the brass washer looking things, and some sort of gdaget that is wired in and fools the ECU, just been to lazy to get it installed.

The Drift battle mag in front of me has em advertised at hi-octane for $245.

I got mine for half that 2nd hand.

Skylinegeoff also has the lock bars for sale I think?

It's not actually that bad, and since you've got an R32, it'll be hydralic, not a computer. Make you feel better? :rofl:

It's a very subtle thing... the rear wheels deflect maybe 1 degree... but when you reef it around a corner at 70-80, HICAS tries to sort out what you're doing, not thinking that you're being a hoon, and tries to save you from destroying yourself... which you're trying to do on purpose, so it can be a little... frustrating. The worst it does is gives the bum end a little wiggle when cornering hard... which like it was stated before, sucks on a track.

well i have a R31 with HICAS and it works even when stationary, dont know about later models though. Just looking at it and turning the wheel you would think it aint moving but it is.

As stated above, with normal day to day driving you would not know it is there.

But when I am driving around a long sweeping bend at speed it starts to wriggle the arse end about which feels very hairy. I also plan to remove it.

When you get the car, find a roundabout and start driving around it, slowly increasing your speed. At the start you feel in control of the car but as you get faster you feel the hicas come into play and try to work against you.

HICAS on an R32 is inactive at low speeds & fairly passive most of the time. It doesn't so much correct you, its more about aiding more responsive turn in and increasing stability mid corner.

/searches for diagram from R32 brochure...... fails :)

Basically:

At intermediate speeds it will angle the rear wheels opposite on inital turn-in to to sharpen the turning response, then angles them the same way as the front for mid corner stability.

At high speeds it does the same minus the initial turn-in opposite angling, the idea being that at higher speed you need less turn in response.

Unless the system is playing up or you entend on doing a bit of track work I really wouldn't worry to much about it.

I've got the Tomei locking kit and my Hicas warning light still comes on whenever I'm pushing it around a corner. I'm going to grab a Kazama lock bar to make sure it's hicas-less...

It's lighting up to tell you there's an error with HICAS... namely there's two metal collars stopping it from moving. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...