Jump to content
SAU Community

Recommended Posts

 

Hi, so my series 1 r33 GTST's AC decided to die in California's hot summer. I've been finding replacement parts and its been a nightmare. I've been thinking of rebuilding the ac but I heard its pretty expensive and It's hard to find a place here in san Francisco. Does anyone here have experiences or alternative to fixing the compressor?

I recently went through this with my w34 stagea and was unable to find new genuine or aftermarket options. I ended up taking a punt and buying 2 used ones off yahoo japan, and the first one I fit worked so I have a suspect spare.

I suspect AC compressors are going to become one of those impossible to find parts over the next few years until someone works out a non genuine alternative including mounting

On 21/07/2021 at 1:37 AM, White GTS-T said:

Hey,

Sorry to hear, I'm not trying to be a dick, but do you know that it is a compressor failure, or are you just speculating because your A/C isn't working?

Well, the clutch is apparently not engaging at all and has a huge gap, it also does have an activating click when turning on the ac. But regardless the compressor needs to be changed anyways

On 21/07/2021 at 1:47 AM, Duncan said:

I recently went through this with my w34 stagea and was unable to find new genuine or aftermarket options. I ended up taking a punt and buying 2 used ones off yahoo japan, and the first one I fit worked so I have a suspect spare.

I suspect AC compressors are going to become one of those impossible to find parts over the next few years until someone works out a non genuine alternative including mounting

Yahoo auction is actually a pretty good idea. do you know if stagea's compressor will fit the gtst? 

Edited by Honeyboost

Possibly...there were differences across R33 air cons and I'm not sure what they were. Late R33 and Stagea are *apparently* the same.

The mounting is the same, the wiring is either the same or interchangeable (1 wire) but the fittings to the car can vary.  I'm sure others know better than me.

You can confirm the exact part# using your VIN through FAST or parts websites.

Clutch <> compressor. Compressor could be fine. Probably is. The compressor and clutch are going to be common with other cars. Take it to an auto electrician, particularly one who also does air-con regassing etc.

And how can it be hard to find someone is San Fransisco to rebuild a compressor? I live in a backward city in a backward country where we all hang upside down from the ground, with a population of only a million or so people and I can probably come up with a list of 5 or 6 places that I would be able to get an air con compressor done. You have SF (pop 1M, LA (pop ~4M), the rest of California (~40M), every other city on the west coast, every city everywhere else in a country with 300 million people.

  • Like 2
On 21/07/2021 at 4:53 PM, GTSBoy said:

Clutch <> compressor. Compressor could be fine. Probably is. The compressor and clutch are going to be common with other cars. Take it to an auto electrician, particularly one who also does air-con regassing etc.

And how can it be hard to find someone is San Fransisco to rebuild a compressor? I live in a backward city in a backward country where we all hang upside down from the ground, with a population of only a million or so people and I can probably come up with a list of 5 or 6 places that I would be able to get an air con compressor done. You have SF (pop 1M, LA (pop ~4M), the rest of California (~40M), every other city on the west coast, every city everywhere else in a country with 300 million people.

you're right, I might've not looked hard enough, I will do that this weekend when i'm free of work

It is possible the clutch isn't engaging because the air gap is too big. The clutch air gap is adjustable. The clutch air gap is determined by a stack of shims of varying thickness. You can change the air gap by changing/removing shims. You also need to be sure the clutch coil magnet is getting 12 volts when you turn your A/C on. And you need to put a set of manifold gauges on the system to see what it is doing. If the gauges indicate the static pressure in the system is okay, and you are getting 12 volts to the compressor and the clutch air gap is within specification, then and only then can you rule out the compressor while watching the gauges. Hope that helps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...