Jump to content
SAU Community

Rebuilding a RB25DET NEO where are Fluid Gaskets used?

QLDR31
 Share

Recommended Posts

QLDR31 Community Regular

QLDR31

Posted
Posted

Hey Guys,

So i'm finally getting around to rebuilding my AWD RB25DET NEO.

I haven't rebuilt an engine before.

I have bought a genuine Nissan RB25DET NEO complete engine gasket repair kit (part number: 10101AA525).

So I have worked out the sump and water pump need a fluid gasket.

Kit instructions say sump needs a 4mm bead of gasket, while other areas require a 2.5mm bead.

Just wondering what other areas need fluid gasket?

Thanks in advance

Brendan

QLDR31 Community Regular

QLDR31

Posted
  • Author
Posted
On 8/7/2021 at 11:31 AM, GTSBoy said:

Corners of cam seals under the cam covers. Little squidge of goo there helps to prevent leaks. That's about it.

Thanks

Not too long ago I used to think every gasket, including head gasket had some on it.

So none on thermostat?

I spose those half moons on the cam cover need some?

GTSBoy Grand Master

GTSBoy

Posted
Posted

You can spooge the thermostat gasket, but it will seal with just a paper gasket. After all, cars have all done that for the last 100+ years.

Cam seal corners and half moons all much the same. Not required, but a little can prevent later weeps developing.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      New fix for low tyre pressure from bmw

      By The Bogan · Posted

      HUMVEE are fine in big open areas, but they are problematic on the street and tight areas As for reliability, some of the  US Army guys I have chatted with have said that when they were working they were fine, but, the do spend alot of time in workshops for multiple reasons, admittedly, they did get a hard time by the boys and girls who drove them I would definitely put them in the "buyer beware" category  They do look tough as nails though 
    • GTSBoy
      R34 gtt rb25det neo timing belt kit

      By GTSBoy · Posted

      Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • GTSBoy
      Another little story of weird shit happening

      By GTSBoy · Posted

      I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • GTSBoy
      braided lines for the turbos

      By GTSBoy · Posted

      For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
    • sunsetR33
      braided lines for the turbos

      By sunsetR33 · Posted

      I don't have the OEM oil feed lines though and the turbo-wraparound line is torn, only has water. My plan is to get replacements for these and just connect a braided line to there. And make sure it's leak free. Hoses like these are also sometimes used to connect external wastegates, so for an EGR I think you're good using them.
×
×
  • Create New...