Jump to content
SAU Community

Recommended Posts

So every other image of the stagea interior ive seen on the forum has the dvd player above the glovebox and some flush inbuilt stereo in front of the shifter, my car for some reason has another entire glovebox above my glovebox, and the dvd player is instead in the centre, along with a single DIN radio and a non-popup screen. The setup was definitely installed in japan as my radio refuses to go outside like 70-89 on frequency and I cant find a manual.

image.thumb.jpeg.8645fbb776baa66bd732561caba3583d.jpeg

Would the stereo removal process be the same as the normal m35 removals on the forum or can I simply slide the single DIN radio out somehow with a tool?

Also, my antennas are like built inside my windshield and Im going to need a new windshield, how would I replace those?

Link to comment
https://www.sau.com.au/forums/topic/484101-removal-of-pnm35-stereo/
Share on other sites

On 4/10/2022 at 4:12 PM, GTSBoy said:

You actually listen to the radio?

Nah, it’s more for the sake of having the function just cause lol. 

Aux works fine but I’d much prefer to stick a Bluetooth radio or even a single din CarPlay radio that folds out or something.

I just can’t figure out how I pull the thing out as all the v35/g35/m35 removal guides I've looked at have different shaped plastic trims that don’t match up to mine so I’m weary of following them and ripping the car up for nothing.
 

Edited by oscian

Just to be clear.....none of that audio shit mounted in the dash is OEM right? It's all aftermarket Jap? In which case, if there is a tool for removing the headunit, it will be Pioneer specific. Some little thing made out of 2mm thick flat sheet with 2 prongs on it or something, to push in and release the tangs. Would only be accessible after you've removed the fascia trim from it.

Same with the Panasonic things. Just work out how to prise that trim off from around the shifter and up the dash. Probably some screws hidden in the ash tray, and the rest of it is just clipped in and you break the clips off with a small flat blade screwdriver and then swear a lot.

9 minutes ago, GTSBoy said:

Just to be clear.....none of that audio shit mounted in the dash is OEM right? It's all aftermarket Jap?

From what I can gather the radio, screen and Navi are aftermarket jap but the navi+screen is connected to my OEM reverse cam and tv tuner somewhere else in the car.
 

I’ll poke around with some pry tools and have a look then.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...