Jump to content
SAU Community

Recommended Posts

I own a 370gt, does anyone know when the motor starts having issues and things start going wrong at a certain amount of k's? Mine are at 200,000 k's right now.

 

The only issue iv had so far is smoke blowing, as oil is getting into/on the spark plug, every 4 months or so I need to change it.

Link to comment
https://www.sau.com.au/forums/topic/484188-370gt-ks-on-motor/
Share on other sites

Unfortunately replacing rings is an engine out rebuild, you would do bearings and seals at the same time, likely cost 5-10k.

Before you did that you would do a compression test to confirm it was rings not something in the head, and unless the car is running terrible you would almost certainly just live with it and top the oil up between changes.

Another possible (more likely) reason for burning a bit of oil on a mid age engine modern engine is the valve stem steals leaking. You would generally notice that most the longer since you last ran the car, it would burn a bit of oil as it first warms up then you probably wouldn't notice it after that. As with rings, you would probably just live with it; it is possible to fix in the car with a bit of fiddling but it would still be a big job. I've previously improved but not fixed older valve stem seals using an oil additive like this https://www.liquimoly.com.au/2782-engine-oil-resealer

  • Like 1
13 minutes ago, threeseventygt said:

I would like to know though what you think the average life expectancy of the engine would be?

It's a bell curve. Some will last infinitely longer than the average, through luck and/or good maintenance. Others will shit the bed as you drive out of the dealer - from bad luck. Others will crap out before 100000km - from bad maintenance. I don't think these VQs have any particular famous weaknesses (ie, oil pump drives, timing idlers, etc, the sorts of things that are famous on various other engines, from RBs to BMWs).

And it's not the 1980s anymore, where manufacturers make simple fatal mistakes like completely stuffing up the design of the ring pack or the ring material. Treated correctly, engines just don't wear the way that they used to - can run for >500000km. But there's always those that don't get treated correctly, even if it's only for a while, and then you end up with ring wear, or bad valve stem seals.

External failures are more common these days. Plastic intake manifolds, valve timing actuators, coil packs, etc etc.

  • Like 1

Totally agree....life of the engine will depend on treatment, maintenance and dumb luck due to the tolerances involved. You can expect trouble very early for any manufacturing/assembly issues, then anywhere between 150,000-500,000 for life issues.

Also worth noting that a properly rebuilt engine (rings, bearings, seals and correct tolerances) resets those estimates, so if you really like the car it is a valid option

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...