Jump to content
SAU Community

Recommended Posts

i went to my machanic the other day as i've been noticing a strong fuel smell from my car, he noticed it as well and before asking me what petrol i use he says you use BP ultimate don't you, he then told me that theres been a few problems with the fuel and the seals on fuel pumps, a few people using the fuel have had this problem and have had to replace fuel pumps but it not being covered by insurance due to "contaminated fuel" just seeing if anyone has heard of this latley??

Link to comment
https://www.sau.com.au/forums/topic/48512-bp-ultimate-problems/
Share on other sites

Check that the fuel cap is secure, and that there are no leaks near or around. Also jack up the car and check underneath where the tank is for any leaks, could just be a small leak that can easily be plugged up...

you wouldnt want that to catch alight from the exhaust.....big dramas....

Let us know what you find out..

I work at Bp shepparton here in VIC and our BP ultimate is far better than those that are in the city, the reason you get bad fuel is that if you live in urban areas , the simple answer is more people use fuel and with a 5000 litre fuel tank the last 1000 is basically dregs take my advice fill up in the early hours of the morning when they've just filled the tanks or fill up in stations not used as much, those out of the way bastard truck stops

Patchy, I am sure there is some truth in what you say, but I would be surprised if 20% of a tanks contents could be considered to be "dregs". If station tanks, pumps and filters are properly maintained, this should not be an issue. Clearly it is with some, though.

Cheers.

it would not be 20% of tanks if you considered that premium, unleaded and diesel all house about 35,000 litres. Bp ultimate is the smallest tank and about those filters i have been working at bp for over 12 months and have never seen any cleaning done to the tanks or the filters so unless there self cleaning... How clean is your petrol?

i have managed a servo, and let me ask you, have you ever seen any big pumping trucks flushing the tanks out to clean them, i have never heard of it being done at quix(mobil) EVER. never personally seen or heard of them being cleaned and at quix as long as the water is below 1000L it is deemed clean, reassuring huh?

Hi guys. I have a little knowledge of refineries and the chemistry involved. My understanding is that the BP Ultimate is refined as a 98 octane fuel, which means that the crude cut used as the base fuel is at or near 98 octane. Whereas the Shell Optimax is a base 95 octane fuel (or maybe 96), which then has various additives mixed in to boost the octane level. This way, Shell save on refining costs, but have more additive costs - the refining costs will be the bigger of the two!

Any gasoline fuel, if left for a long period in an atmospheric tank (which all station tanks are), will "weather" - i.e. they will gradually lose the more volatile components (it's all a matter of vapour pressure and the tank "breathing"through the vent). This will generally cause the octane of the weathered fuel to be reduced.

Hope this helps.

Cheers.

Some early R32 and R33 Skylines arn't preimum fuel cars and therefore you shouldn't be using preuim fuel anyway, if your Skyline is after 1995 then they will all be preimum only cars, where as before that it's a mix so you should look up your manual that check that out.

Some unleaded cars will have problems with preimum fuels as they will burn out filters etc quicker than normal.

Also about the fuel:

BP Utimate and mobil Vortex, are 98% ron fuel they don't have any cleaners in them.

Shell optimax is 98% ron fuel but with a cleaner in it, so it will help to clean out your fuel system.

I've run Shell optimax in my own unleaded car it ran much better but Shell state that you shouldn't use premium fuels in unleads more more than once or twice in a month as it can cause problems for the engine.

Also had a WRX and ran all 3 types of fuel through it and the Shell fuel ended being the best out of the three providing much more power and resposne.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey crew, Failed my WOF cause of a lower control arm, and I've decided to hit both arms, and also the compression rods at the same time(seems they're gonna be the most likely upcoming failure points from some discussions with the lads over on the G35 reddit). I've looking at these form Z1:  https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-compression-rod-p-40716.html https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-lower-control-arm-p-40674.html I asked Z1 if they'd work as it's the same platform, just RHD vs LHD. I basically got told "Lol dunno". Specifically they aren't aware of any difference but can't guarantee fitment as they haven't done it on a 350GT. So guess I'm asking is if there is any issues with using 2005 G35 coupe suspension parts on a 2005 350GT coupe? Orginally I thought it could be something in the way of the arms that each control arm is designed to be positioned around, but that'd be an engineering nightmare for Nissan needing two different shaped control arms 😅
    • ^ This. The mode door actuator is a common failure, as is the actuator and/or the actual valve for the coolant flow control valve. I also don't know how available the mode door actuator is these days. I've been meaning to look into it and get one from wherever is possible, to keep in the shed for the rainy day when mine eventually fails. Anyway, the advice to you is to search the usual NOS part supply places, or even just go to Nissan and see what they list.
    • Have you got a pic of the actuator? My guess is that unit has failed internally and was flopping around, so the previous engineer who owned it forced it to be fully open to cold air (blocking the heater core path). As far as you can tell, is anything else wrong in the system? Likely you just need a new actuator (not sure how available they are) and then "installation is the reverse of disassembly"
    • I'm happy with the Lsailt unit that I put in, it puts full Android on the top screen so you can run whatever Nav and other Apps you want, while still existing inside the factory functionality like automatic reverse cams, audio input switching, retains factory bluetooth etc. Not cheap and the install was moderate (not simple, not hard) Yours is a V36 not V37 though right?
    • Yeap, all the NC's that I originally looked at that had a hard top were PRHT, which makes the roof line look horrible, hence why I said nope to them My only caveat for another MX5 was it needed to have a hard top, and initially I didn't think you could get a detachable hard top for the NC,  like my NB had Again, a big thanks to Matty for helping me source the detachable hard top for my little girl, they are as rare as hens teeth in Australia, and the few people who have them, keep them Also to Greg, for initially pointing me in the NC direction NC PRHT 🤢🤮 Not mine (I really should take more photos of my car), but a NC with the detachable hard top 😁 To me, the difference in how the detachable hard top roof line looks, and how it actually follows the bodies lines, like they do on NA's and NB's, is chalk and cheese compared to the bulbous looking PRHT  
×
×
  • Create New...