Jump to content
SAU Community

Recommended Posts

Just picked up my 96 r33 GTR Vspec it currently is running a 4" exhaust with an AES 4" dump pipe, the car is so loud it's driving me nuts and I have ringing in my ears all night after driving it so I'm hoping others out there have a suggestion for a 4" inlet muffler that's not a cannon style that can bring down the db when the AES valve is closed 

received_1335413463707255.jpeg

received_926533392247428~2.jpeg

received_943640293773919.jpeg

Link to comment
https://www.sau.com.au/forums/topic/485346-4-inlet-mufflers/
Share on other sites

If you want a 4inch muffler check out SP Mufflers.  After some advice I got on here I reached out to them.

Made me 2 custom mufflers in 4inch in and out to suit my probably one of the few Cefiro with 4inch exhaust.

Super easy to deal with and it is super quite, maybe too quite.    They can make to suit you though.

 

https://www.instagram.com/spmufflers/

  • Like 1
  • Thanks 1
6 hours ago, r32-25t said:

That video sounds like the dump valve is still open

ive got AES mufflers in my 4in exhaust and it’s very quiet (I don’t have a dump valve at all) 

No definitely closed I'm not sure if it opens up under heavy acceleration but it's definitely closed at the beginning of the clip 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...