Jump to content
SAU Community

Recommended Posts

  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

bodykit looks custom style thing too me, definately not veilside and doesnt look like vertex either.

paint is just a really nice metallic blue of some description :P like a candy metallic blue by the looks. and bonnet has silver paint with big metallic glitter stuff in it.

CerealKiller - dunno why you call the paintjob crap, looks great in my opinion =] though i would prefer carbon fibre bonnet, no stickers, and a more simple Vertex kit

They're 10" and 12" wide wheels filling out those guards Shan... please don't do an "HPI drift Silvia" and put wide guards on then have your 7" and 8" rims do a really bad job of filling out the wheelarches.

HEY GUYS,

Just wanna see some good pics of your R32's here!

Also, with the picture attached, can someone tell me what sorta paintjob it has, and what sorta bodykit/sideskirts it has ?

Thanks!

Hey man,

The paint is HOK Cobalt Blue Candy.

The body kit is an ECCE item (ECCE , as already pointed out is a NZ company). If you want a kit the same, speak to Bodyform in Sydney. They'll have to adjust the kit to fit a GTS-t though (as they did with this car) as it's meant for the GTR. I spoke to the guys there about it and they seem tops. Pretty sure they guy said this was actually HIS car when i mentioned it to him.

Cheers,

Dave.

They're 10" and 12" wide wheels filling out those guards Shan... please don't do an "HPI drift Silvia" and put wide guards on then have your 7" and 8" rims do a really bad job of filling out the wheelarches.

Hey rezzeh, are you sure they're 10's in front ant 12s in the back, if so then I'm gonna kick myself as I just passed up a set off a VIP gloria which sold for 20000Y which is uber uber cheap. I thought they were 9's at the front and 11's at the back. Also I'm going for the rims sitting flush with the guard look, and seeing as I've got 4 stud hubs I have to get the 4stud to 5 stud conversion hub extenders, which should help me get the rims sitting exactly flush with the fenders.

What would help is if I could get a response out of BN Sports on what spec rims I should use on a GTS instead of finding out by trial and error.

Hey rezzeh, are you sure they're 10's in front ant 12s in the back, if so then I'm gonna kick myself as I just passed up a set off a VIP gloria which sold for 20000Y which is uber uber cheap. I thought they were 9's at the front and 11's at the back. Also I'm going for the rims sitting flush with the guard look, and seeing as I've got 4 stud hubs I have to get the 4stud to 5 stud conversion hub extenders, which should help me get the rims sitting exactly flush with the fenders.

What would help is if I could get a response out of BN Sports on what spec rims I should use on a GTS instead of finding out by trial and error.

I'm not sure Funkeh, I'm assuming they used +25 - +30 offset, so to get the rim out that far, you'd need at least an 11", maybe 12" rim on the rear to fill those guards. My 9" rims on the back are f-l-u-s-h with the wheel arch with +35 offset on the standard guards, you'd at least need a couple more inches on that width to fill out those BN rear guards. As for the front... same. My 8" sit a tad in from the stock front guards, so I would've thought another couple of inches to fill out the BN guards... at +35 or +40 offset...

Why don't I just e-mail them...:confused:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...