Jump to content
SAU Community

R32 GTS (RB20 DET) Reliability??

benl1981
 Share

Recommended Posts

benl1981 Grand Master

benl1981

Posted
Posted

guys,

I'm just looking into buying one of these at the moment (importing), was just wondering how reliable or unreliable they can be. I'm used to a toyota which causes hardly any problems at all (a 1986 corolla 4age), was wondering if I can expect similar reliability out of a 1989 GTS. I realise they are a turbo car so there is an extra something to go wrong etc.

How tough are the the RB20 - if it's been running stock boost and serviced they should last a while right? I realise they are getting old now so a few repairs are inevitable - but I just don't want to be paying heaps for parts and getting things fixed...if possible. I don't think I will be able to get a compression check done prior to purchase, but I see engines are relatively cheap from importers (although could also be close to shagged).

How about theft, as I will probably be just doing 3rd party property cover. Plenty of kill switches I guess

Any weaknesses of this model?

Electrics?

Engine?

G/bx?

diff?

etc...

Many thanks!

PS I also posted same question in maintanence, wasn't sure where to put this

Link to comment
https://www.sau.com.au/forums/topic/49165-r32-gts-rb20-det-reliability/
Share on other sites
CerealKiller Veteran

CerealKiller

Posted
Posted

since I bought my R32 nearly a year ago I've had to go through a fair amount of repairs. Some of these things include:

fuel pump, clutch cylinders, alternator, head gasket.

Some of the things I need to fix are:

turbo gasket, gearbox, tie rods.

Overall it's a very reliable car if it's maintained well. Obviously my previous owner didn't. Because you're getting a 89 model, I'm guessing you're buying a non stock one? If anything I'd probably import a later model (93) but in stock form. They're fairly cheap to modify and get power from.

The only real weakness with the car would be the gearbox but that's only if you've got a lot of power.

Oh and this is my daily driver as I can't afford anything else. It is a pleasure to drive however in heavy traffic it becomes a burden.

If you're getting 3rd party only I'd at least get a tracking alarm like Quiktrack.

benl1981 Grand Master

benl1981

Posted
  • Author
Posted

hmm. That doesn't sound real promising. I'm looking at a bog stock one. WHy do you think it would be non stock? They came out in 89 right?

Most of those repairs are fairly normalish, but I guess it's pretty unlucky to have them all go on you within a year. I suppose I'll have to be careful :P

Remix- Mentor

Remix-

Posted
Posted

I have had mine for around 5 months, and not a single weekend has passed where i haven't raped it. I never fail to service it. The only thing's that have gone wrong so far:

1. Bushes needed to be replaced

2. Stock suspension was crappo - Replaced it with Tein HE's

3. Gear socks were worn out - Replaced them with new leather items

4. Stock speakers were shot

And that's all! It really comes down to luck, how you maintain it, and i guess how the previous owner treated it.

But otherwise, as with every car - there will always be lemons. Skylines are generally quite a robust car. Good luck!

Chris32 Veteran

Chris32

Posted
Posted

I have had mine for three and a bit years, the only thing I have had to replace mechanically was the turbo and the clutch. My diff is gettting a little knackerd now, but I guess its just wear and tear. Castor rods also needed replacing, as did the suspension and brake discs and pads

Mine has travelled close to 83,000km since I have had it (got it at 53,000, now 136,000. The best bit is that 40,000km have been done making 200rwkw, so its been very reliable I reckon.

I do a oil change with either Motul or Mobil 1 every 4-5000 as well, and keep everything topped up

The gearboxes are a weak link if drifting or dragging regularly, or if using R compound semi slicks, but they are as tough as most gearboxes going around, its just that the R33 GTS25T box is tougher again, so it makes the 32 box look a little weak. The upside to this is a decent 32 box should cost less than half of a decent 33 box if it ever does break

Most parts are cheap and plentiful too

Budget for a timing belt, and all fluids and brake pads to be changed I would say if you import a 89 model

Chris

benl1981 Grand Master

benl1981

Posted
  • Author
Posted

Wow..that's pretty impressive guys!! You have sold me. Are the head gaskets pretty robust? If it has had crappy rusted water in for awhile and I flush out and give good coolant should it last a while (on stock boost)? I had heard they're pretty tough cars

Any of you 3rd party property them? Is a decent alarm a necessity - or can youi get away with various kill switches steering locks etc etc?

"Budget for a timing belt, and all fluids and brake pads to be changed I would say if you import a 89 mode"

Yes I will Chris - thanks. Are they an interference motor - as in if the timing belt breaks do you bend valves? I would do this anyway. I have the tools, does it take long to do on these motots, timing belt that is.

gtst89 - you've had a good run with yours - hope I can be so lucky (damn - that's a kylie minogue song :P , oh well she's pretty hot)

CerealKiller Veteran

CerealKiller

Posted
Posted

it all comes down to how well the car's been looked after. My wasn't all that good however it is a very reliable car, the only time I've broken down was when my alternator died and my battery went flat.

I wouldn't skimp on security if I were you. Skylines are often targets for thieves (just do a search for "stolen"). club locks and ignition barrel switches are easy to by pass. kill switches are only as good as they are hidden.

  • 2 weeks later...
benl1981 Grand Master

benl1981

Posted
  • Author
Posted

I was wondering what kind of fuel economy I can expect in not too heavy city driving - with the occassional gas. A friend with a soarer 2.5 t/turbo gets about 11-12 L/100kms so I was thinking maybe a litttle better that that?

2 litre turbo, should be ok on fuel? As long a s you don't gas it heaps?

My Corolla currently gets about 8L/100km..what do you think 30% more for petrol with the skyline?

benl1981 Grand Master

benl1981

Posted
  • Author
Posted
should be around 12L/100kms. But that's with clean injectors, and O2 sensors.

That's not real good. Thought it would be a fair bit better than a commodore, I suppose commohores are about 13-14.

It's bad getting used to corolla economy - you become a tightarse

Chris32 Veteran

Chris32

Posted
Posted

I average about 11 litres per 100kms......mainly to and from work

If I give it heaps on the weekend, i have have used as much as 25 litres per 100kms.....:cheers:

off boost they are ok, on boost they chew through a bit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...