Jump to content
SAU Community

Recommended Posts

Hi all,

I copped some flack on another thread because of my intention to do an RB conversion to my HR30 Paul Newman.

What are the thoughts on a sort of stock looking 3029cc L Series in my PNV.

All the purists accept that on a power upgrade?????

Link to comment
https://www.sau.com.au/forums/topic/49228-r30-purists/
Share on other sites

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Grumpy old turd alert.

I'll give you my honest suggestion and that is to set your old shitter on fire. Can't say I own a classic? You don't know what I own you ignorant fool. I'd take a DR30 any day over that. HR30's were built for hitting kerbslike this

Link to comment
https://www.sau.com.au/forums/topic/49228-r30-purists/#findComment-984803
Share on other sites

Grumpy old turd alert.

I'll give you my honest suggestion and that is to set your old shitter on fire. Can't say I own a classic? You don't know what I own you ignorant fool. I'd take a DR30 any day over that. [pisstake]HR30's are only good for hitting kerbs like this.[/pisstake]

Link to comment
https://www.sau.com.au/forums/topic/49228-r30-purists/#findComment-984804
Share on other sites

Grumpy old turd alert.

I'll give you my honest suggestion and that is to set your old shitter on fire. Can't say I own a classic? You don't know what I own you ignorant fool. I'd take a DR30 any day over that. [pisstake]HR30's are only good for hitting kerbs like this.[/pisstake]

HR30 PNE is hardly a shitter its like the brock edition of a commo (sorry to have to use that foul language).

I own a few cars of which one is powered by an RB25DET and the other a modified L28E.. guess which ones more fun to drive? thats right the MR30!! that L series growl and the unadulterated power is insane, who cares if its only a 2 valve, single cam, non cross flow engine? they can still make power and are a very good engine... and i am sure Ghostriders intentions for the 3.1L are not going to be shabby.

Link to comment
https://www.sau.com.au/forums/topic/49228-r30-purists/#findComment-985051
Share on other sites

Dear oh dear,this thread got off to an angry start! ;)

Ghostrider,in anohter thread didn't you say you had just completed the built of an RB25/30?

If you've finished this engine,I'd say stick to your original plan and use it.Much more cost effective! :) I think it'd have to be more "street friendly" than an angry L too. Although a 3L L's big stroke could bring a T51R on boost nice and early! :D

Your car....it's up to you!

Link to comment
https://www.sau.com.au/forums/topic/49228-r30-purists/#findComment-985323
Share on other sites

go the rb, but dont modify any original parts....use 2nd hand xmembers to chop, or make new ones, that way you can return it to standard...on the other hand, unless its completely stock at the moment, ie orig motor and brakes and such, it doesnt matter what you do to it cos it is no longer original anyways...

hell i dont know i love the old L series too.....supercharged 3.1 litre Lseries......oh god yes!

Link to comment
https://www.sau.com.au/forums/topic/49228-r30-purists/#findComment-985437
Share on other sites

To RSX, Turbo of coarse, probably a T04R or the GT35/40 I bought for the RB. The problems I spoke of are currently under control, these alternative medicine guys can be brilliant.

OHR30T, Yes the RB is finished, but thought I might shelve it for a while, as the 3L L Series sounds awesome, just think, No engineers report needed, no cat, just get a blue slip and go, as by chance, it will still be carrying the L20A engine number. Let our RTA & police have fun with that.

Link to comment
https://www.sau.com.au/forums/topic/49228-r30-purists/#findComment-985595
Share on other sites

Grumpy old turd alert.

I'll give you my honest suggestion and that is to set your old shitter on fire. Can't say I own a classic? You don't know what I own you ignorant fool. I'd take a DR30 any day over that. [pisstake]HR30's are only good for hitting kerbs like this.[/pisstake]

What can I say?????

Listen to the masses, you appear to be out numbered in your views.

As you have the numbers covered, we won't know for sure, but as it has WA plates, DID YOU HAVE A BAD DAY AT THE DRIFTING???????

As for HR's on drift, maybe you should look at some of the R33's after they come unglued at the drift meets, even the japs have mishaps occassionally, just look at the videos from HPI Magazine.

For your info, DR, HR & MR Skylines are basically identical and mine has all the new hi tech bits, like coil over suspension, DR front & rear brakes, Cusco LSD, fully adjustable front & rear suspension and IF I choose to build this 3L stroker, I think it might be quicker than your GTS25t, now wouldn't that be embarrassing.

Link to comment
https://www.sau.com.au/forums/topic/49228-r30-purists/#findComment-985648
Share on other sites

i think b005t would smoke you  

you asked for an opinion, now dont cry if its not what you wanted to hear, or where you just after someone to justify a choice you have made?

l series engines are buckets of shit. but hey, do whatever you like.

That's an interesting thought.

On paper, I can produce at least 250rwkw @ 15psi from the L Series motor and my HR weighs just 1100kg. That would mean his R33 would have to have 300rwkw to just equal the same power to weight ratio, not to mention the enormous torque the 3.1 would produce.

You guys think the RB's are the be all and end all of engines, maybe I should just go for it and see how I compare on the dyno, you might be embarrassed as well.

It would be interesting if my "bucket of shit" out performs you eh!!!!!

I have built an RB30/25 DET and think I can equal or better the output with an L series of similar capacity. After all, absolute HP means stuff all if you can't get it to the ground successfully.

A mate has an L28ET running on straight LPG and point to point, he was faster with 145rwkw than he is now with 180, as now wheel spin out of corners is a problem.

Link to comment
https://www.sau.com.au/forums/topic/49228-r30-purists/#findComment-985845
Share on other sites

the old L series are built tough!!

i know of many that seem to go on forever if looked after.. i have 2 bluebirds with L20B's at home and one has done 350,000+ kms (speedo stopped) and thats my daily driver it still goes really well and doesn't hessitate to start.. my dad even said to me he was surprised it didn't blow any smoke! the other one blew a head gasket due to a broken waterline which ran through the inlet manifold. $30 head gasket and she'll be good!

and my L28 snaps the tacho round quicker than the RB does!

why not go twin turbo blow through mikuni's?? haha has anyone else seen that S14 in japan with the L31 setup like that?

Link to comment
https://www.sau.com.au/forums/topic/49228-r30-purists/#findComment-988110
Share on other sites

OHR30T, Yes the RB is finished, but thought I might shelve it for a while, as the 3L L Series sounds awesome, just think, No engineers report needed, no cat, just get a blue slip and go, as by chance, it will still be carrying the L20A engine number. Let our RTA & police have fun with that.

Haha,the "up yours RTA" value alone would make it worth doing! :D

And is it some people don't like old engines,or is it old Skylines? :)

Link to comment
https://www.sau.com.au/forums/topic/49228-r30-purists/#findComment-988855
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Drilled the rubber out on a slow speed and it didn't catch much at all. Probably only half a dozen holes was enough to shred the rubber and it dropped off easily leaving the inner sleeve behind. Will tackle that later
    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
×
×
  • Create New...