Jump to content
SAU Community

Rez's R32 GTS-t Type M... presentable version!


Recommended Posts

  • Replies 322
  • Created
  • Last Reply

Top Posters In This Topic

Nice car!

(I only like it cos it has a purple front on the stereo) :)

I'll get a night shot of it all lit up... you'll love it even more then. So whaddaya think of the knob? :P

Justin,

a couple of years back I drove to Kyoto...IIRC the drive was somewhere between 3 and 4 hours, but that was 5 people, plus luggage, packed into a Nissan cube with 89 PS of raw power and a max cruising speed of around 80mk/h, less when going uphill :):P:)

I imagine, in light traffic and with a heavy right foot, you guys could easily do it in around 2 hours or so....

Justin,

a couple of years back I drove to Kyoto...IIRC the drive was somewhere between 3 and 4 hours, but that was 5 people, plus luggage, packed into a Nissan cube with 89 PS of raw power and a max cruising speed of around 80mk/h, less when going uphill :):P:)

I imagine, in light traffic and with a heavy right foot, you guys could easily do it in around 2 hours or so....

Mmmm, interesting... Troy, what do you think?

Dave, I've been quoted anywhere as long as 6 hours!! ;)

but that was from my place to Kyoto - no Osaka. Depends on the traffic really - going there took a lot longer (as I recall) 'cause we got caught up in traffic around Nagoya...

As I said before, I highly recommend you stop off at the Nissan Prince museum in Nagano - it's on the way to Yamanashi and well worth the visit...it'll break up the long hours on the expressway too....

if you give me the post code, or name of the area of where you're living now I can run it through me Nav system and get an accurate time/distance report from here to there/there to here...

I think the six hour estimate assumed you were driving with Miss Daisy :) RB powered rocket ships (and Evo's :P) should be able to do it much quicker than that :)

Mmmm, interesting... Troy, what do you think?

 

Dave, I've been quoted anywhere as long as 6 hours!! ;)

Justin, arghhh... traffic depending, it took me 4 hours to get to Suzuka during last year's F1 final but that wasn't taking the highway and there were heaps of traffic. But nice traffic...I pulled into a convenient store just a few kilometers from the circuit and there were a few F40s, 360, Lambos, Porkas also going to the race but stopping for a break. I managed to get some attention when a few French Rally fans came over and asked if I was a rally driver :):D:D (taking the back roads the car was very dirty and it rained heavily on the way over, not to mention my mate and I were in our F1 Malboro Racing shirts) ;)

2033CIMG2544_copy.jpg

Now in comparison if I took the highway heading to other places...it took me 3 hours to get to Hiroshima with light traffic, or 4 hours to get to Takatsu Snowfield North of Gifu or North to Japan sea - Amanohashi 2.5 hours. By right you should be able to get to Tokyo in 6 hours but not with Japan's traffic...10 hours more like it, but where Dave lives I think it is still quite rural...I still say 4 hours including short breaks or 3 hours nonstop.

Dave, are you talking about that interchange North of Nagoya/South of Gifu? If you take the wrong lane/turn you end up doing a big loop.

stock?

how much are the mirrors mate?

oh and less talk more pics ;)

Price as bought in Japan (ie: no freight cost) A$300.

Heres another pic... and it ain't pretty. This view will change soon enough:

engine_with_pod2.jpg

looks like my engine bay. (including the APEXi pod) - are you going to box that up?
Evo_Lee has boxed his air cleaner up quite well, with a new "SuperAutobacs super induction air feed suction pipe"... and seeing as me and him are unofficially competing with each other with mods (he's leading - trust me ;)) I might just try and box it up and put a cold air feed in too.

Justin, if I still had the factory airbox like you do, I would have converted it to enclose the pod.

The one I have now is a WRC airbox, but look through the books I passed to you...I'm sure you should be able to find some airboxes in there.

Are we competing...I maybe leading but your car is still lighter, more so when your carbon bonnet goes on...yikes!

come on Dave, you've secretly got a turbo hiding under there right?

plus don't you have a set of TE37, reduced unsprung weight!...if you take out the spare wheel, jack, rear cardboard, carpets, babyseat etc you should be able to run against Justin...would certainly be an interesting test too ;)

come on Dave, you've secretly got a turbo hiding under there right?

hehehe, the only way I'll have a "turbo" under the bonnet of my GT-V (anytime soon) is if I borrow the wife's hairdryer and duct tape it in the engine bay :D :D :D

I dunno - stock 200PS RB25DE GT-V Vs slightly modded RB20DET GTSt????

...the GT-V is slightly heavier than a 25GT (due to the extra GTT parts)...I've wanted TE-37's for a long time, but a set of Work Emotions came my way and I couldn't say no. Isn't the R32 GTSt lighter than the R34's anyway?

Nah, a few mods to a the RB20DET and Justin will leave me for dust ;) Still, be an interesting race though :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
×
×
  • Create New...