Jump to content
SAU Community

Recommended Posts

Hiya All - Due a clip holding a hose to my oil cooler failing, I've now got a a broke engine. I'm trying to decide wether it'd be cheaper to rebuild it (quoted $10,000 AUS by 4 very well known UK Tuners) or put in a RB26.

Has anyone changed the engine on a GTT for a RB26 over here?

I'm assuming the Loom and ECU would have to be swapped as well but else (cooling pipes, intercooler piping, anything I've left out etc)

Cheers......................................................IAnH

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/
Share on other sites

I have a simple suggest after driving all the previous model skylines fitted with rb26's .

even if it cost you a little more for the conversion. do it no ifs no buts. :P

I see buy your sig you like a fast cars and probably will go faster then this is your asnwer you will have 400 hp from a stock rb 26 and 5 and 600 hp is very doable on an unopened motor. if you had driven a gtst with an rb 26 you wouldnt be asking this question. its a great package well worth any teething issues.

meggala

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992460
Share on other sites

Hiya Meggala - I was going to sell my GTT for a 550+hp R32GTR so now I've got the option of dropping a similar powered GTR engine into my GTT I might keep it.

Cheers.......................................................IAnH

(ps Your website has been a constant source of helpful info, Top Job Fella!)

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992488
Share on other sites

duncan I prefer the rb26 for many reasons.

just to name a few sodium filled valves solid lifters ability to handel 500 600 hp. great power delivery great note, revability. good oil system a proven package.If tuned properly the rb26 will prov a great package I have never heard of any one doing the rb30 det conversion who had to pay for labour etc coming out under 10 k with 500 hp. if you drive an rb 26 equped r33 or r32 you will have a grin from ear to ear and such great drive ability and power deliver you will see

meggala

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992508
Share on other sites

duncan I prefer the rb26  for many reasons.

just to name a few sodium filled valves solid lifters ability to handel 500 600 hp. great power delivery great note, revability. good oil system a proven package.If tuned properly the rb26 will prov a great package I have never heard of any one doing the rb30 det conversion who had to pay for labour etc coming out under 10 k with 500 hp. if you drive an rb 26 equped r33 or r32 you will have a grin from ear to ear and such great drive ability and power deliver you will see

meggala

So many different schools of thought. Do many people walk away with much change from 10k after putting a std RB26 in their car?

I have a car with no engine, i need to make a decision, i want an RB20 so i can give a certain SR20 a run, but ill happily swallow my pride if it means saving me money and going quicker :uhh:

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992516
Share on other sites

but roy in your case I would even think about an rb 25 and whack on your turbo set up )

250 rwk + is very achiveable there

meggala

NO!... LOL I couldnt turn my back on the RB20 for the RB25. That would be like sleeping with your mates wife. With the RB26 at least she is a supermodel and ppl may understand my treachery :whip:

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992534
Share on other sites

I pondered the same conversion - RB26 into R34 GT. However, just the sheer pain of finding a late model RB26 to me made the conversion a dream. Even finding a late model RB25 NEO was impossible (outside of a Stagea which I eventually ended up with).

Either that or I'm just looking in the wrong places!!

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992584
Share on other sites

Hiya Dan - It'll physically fit but the hassle will be the ECU, Loom, Sensors and Wiring.

I was already making 350hp on a Dynapak (at the hubs) on stock internals but if I supply a GTR engine and let the tuner keep my GTT engine he'll fit it for free (it'll be the 1st GTR/GTT in the UK so it'll be used for some advertising I expect!)

I'm expecting around 350-400hp again at 1bar but it depends on the turbos I get (hopefully re-built stock ones with metal blades!) as I'd like to run at 1.2bar again.

I'll have to get a new downpipe and another AFM & Filter (probably new intake pipes for the 2 turbos too!)

When it's done I'll post it on here again.

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-995435
Share on other sites

Dude the R34 RB25 engines are worth a fair bit, considering they come with RB26 rods and solid buckets. Really there isn't much difference internally apart from the VVT. That rebuild figure you intitially got is bullshit too, get a 2nd quote from another source - like a machine shop. They won't triple the price because you have a late model expensive car like tuning shops do...

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-995956
Share on other sites

Personally I would do the RB31 (forged) bottom end, and with the RB25NEO top end it would be a real goer. We have a ~600 bhp RB26DETT and a ~600 BHP RB31DET and I can tell you the RB31DET is much much faster. The max power might be the same, but the average power from the RB31DET is much higher. I have never actually worked it out, but it would be a good 60-70rwkw from 4,000 rpm to 8,000 rpm.

My 20 cents worth. :cheers:

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-996009
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
    • Yes it is ATF. I quote @Duncan "it takes a good synthentic auto trans fluid like Castrol Transmax Z" It's not a diff. It's a transfer case. Totally different thing. Yes, fluid will come out the sender hole. No you do not really need to drain it. Just pull the old, quickly poke the new, clean up and top up. But realistically, you should probably take the opportunity to change it anyway.
×
×
  • Create New...