Jump to content
SAU Community

Recommended Posts

Hiya All - Due a clip holding a hose to my oil cooler failing, I've now got a a broke engine. I'm trying to decide wether it'd be cheaper to rebuild it (quoted $10,000 AUS by 4 very well known UK Tuners) or put in a RB26.

Has anyone changed the engine on a GTT for a RB26 over here?

I'm assuming the Loom and ECU would have to be swapped as well but else (cooling pipes, intercooler piping, anything I've left out etc)

Cheers......................................................IAnH

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/
Share on other sites

I have a simple suggest after driving all the previous model skylines fitted with rb26's .

even if it cost you a little more for the conversion. do it no ifs no buts. :P

I see buy your sig you like a fast cars and probably will go faster then this is your asnwer you will have 400 hp from a stock rb 26 and 5 and 600 hp is very doable on an unopened motor. if you had driven a gtst with an rb 26 you wouldnt be asking this question. its a great package well worth any teething issues.

meggala

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992460
Share on other sites

Hiya Meggala - I was going to sell my GTT for a 550+hp R32GTR so now I've got the option of dropping a similar powered GTR engine into my GTT I might keep it.

Cheers.......................................................IAnH

(ps Your website has been a constant source of helpful info, Top Job Fella!)

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992488
Share on other sites

duncan I prefer the rb26 for many reasons.

just to name a few sodium filled valves solid lifters ability to handel 500 600 hp. great power delivery great note, revability. good oil system a proven package.If tuned properly the rb26 will prov a great package I have never heard of any one doing the rb30 det conversion who had to pay for labour etc coming out under 10 k with 500 hp. if you drive an rb 26 equped r33 or r32 you will have a grin from ear to ear and such great drive ability and power deliver you will see

meggala

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992508
Share on other sites

duncan I prefer the rb26  for many reasons.

just to name a few sodium filled valves solid lifters ability to handel 500 600 hp. great power delivery great note, revability. good oil system a proven package.If tuned properly the rb26 will prov a great package I have never heard of any one doing the rb30 det conversion who had to pay for labour etc coming out under 10 k with 500 hp. if you drive an rb 26 equped r33 or r32 you will have a grin from ear to ear and such great drive ability and power deliver you will see

meggala

So many different schools of thought. Do many people walk away with much change from 10k after putting a std RB26 in their car?

I have a car with no engine, i need to make a decision, i want an RB20 so i can give a certain SR20 a run, but ill happily swallow my pride if it means saving me money and going quicker :uhh:

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992516
Share on other sites

but roy in your case I would even think about an rb 25 and whack on your turbo set up )

250 rwk + is very achiveable there

meggala

NO!... LOL I couldnt turn my back on the RB20 for the RB25. That would be like sleeping with your mates wife. With the RB26 at least she is a supermodel and ppl may understand my treachery :whip:

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992534
Share on other sites

I pondered the same conversion - RB26 into R34 GT. However, just the sheer pain of finding a late model RB26 to me made the conversion a dream. Even finding a late model RB25 NEO was impossible (outside of a Stagea which I eventually ended up with).

Either that or I'm just looking in the wrong places!!

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-992584
Share on other sites

Hiya Dan - It'll physically fit but the hassle will be the ECU, Loom, Sensors and Wiring.

I was already making 350hp on a Dynapak (at the hubs) on stock internals but if I supply a GTR engine and let the tuner keep my GTT engine he'll fit it for free (it'll be the 1st GTR/GTT in the UK so it'll be used for some advertising I expect!)

I'm expecting around 350-400hp again at 1bar but it depends on the turbos I get (hopefully re-built stock ones with metal blades!) as I'd like to run at 1.2bar again.

I'll have to get a new downpipe and another AFM & Filter (probably new intake pipes for the 2 turbos too!)

When it's done I'll post it on here again.

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-995435
Share on other sites

Dude the R34 RB25 engines are worth a fair bit, considering they come with RB26 rods and solid buckets. Really there isn't much difference internally apart from the VVT. That rebuild figure you intitially got is bullshit too, get a 2nd quote from another source - like a machine shop. They won't triple the price because you have a late model expensive car like tuning shops do...

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-995956
Share on other sites

Personally I would do the RB31 (forged) bottom end, and with the RB25NEO top end it would be a real goer. We have a ~600 bhp RB26DETT and a ~600 BHP RB31DET and I can tell you the RB31DET is much much faster. The max power might be the same, but the average power from the RB31DET is much higher. I have never actually worked it out, but it would be a good 60-70rwkw from 4,000 rpm to 8,000 rpm.

My 20 cents worth. :cheers:

Link to comment
https://www.sau.com.au/forums/topic/49794-rb26-into-r34gtt/#findComment-996009
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...