Jump to content
SAU Community

Need help with wheel offset please !!


Recommended Posts

Hi all,

i bought this set off rims and tyres for my 33Gtst but i assumed that it's more for a GTR than a gtst. ( If it's for GTR then GTR boys get your $$ ready if you want it :wassup: )

Its' VolkRacing Daytona JJ, front is 17/8 PCD 114.3 OF+45 5 H BMT

rear is 17.95 PCD 114.3 OF+40 5H BMT.

I could be wrong with the numbers as it was dark but otherwise everythings that i wrote here was right.

They VOLKRACING symbles are at the front but the sticker say RAYS ENGINEER at the inside so i assumed that RAY make them, if so then are they LIGHT WEIGHT? I went to Volk site but i couldn't find it, maybe its too OLD.

Another thing is Tyres are GrandPrix M7R, are they good?

Link to comment
https://www.sau.com.au/forums/topic/50456-need-help-with-wheel-offset-please/
Share on other sites

OK it was 45 for front and 40 for rear, took a closer look today. The rear fitted perfectly, excepted for the FRONT. Touch just a tiny bit on the capliper ( DAMN ).

The R33 GTSt offset is +38. +45 sounds like a wrx offset. Do you know what car they came off?

It can never be for a Rex because it's 17/ 91/2 at the back and 17/ 81/2 at the front.

Anyway i'm taking it to THE TYRE FACTORY see what they can do. Properly they will put SPACER in it, you guy reckon? Is spacer legal in VIC?

I don't want to let go of this set cos' i like it. And yeah its' does feel LIGHT.

did you buy those rims off firesport?

No, i bought it of this guy David who owns a Mini Me of Nigel supra, it almost identical to Nigel's one but it's none turbo so i call it like that :headspin: .

And yeah the offset is 45 compare to standard skyline 38 so i don't understand why it touch the capliper a bit, maybe i should move it around and stuff.

I told nige about that supra when i first say it a few days after the autosalon earlier in the week and he was determined that it was not the same orange :P

With ur wheel spacers, it is illegal to have them floating they have to be bolted to the hub.

Be carefull with the tyre factory especially the dande one as they will tell you abything to sell you something.

Rays are the manufacturer. They make all different brands of rims eg. Nismo, Versus, Volk and Gram lights just to name a few. I've seen those rims before on a 33. Not sure of offset sorry. They would be at least 4 or so years old.

Might sound silly but have you just tried fitting them??

Rays are the manufacturer. They make all different brands of rims eg. Nismo, Versus, Volk and Gram lights just to name a few. I've seen those rims before on a 33. Not sure of offset sorry. They would be at least 4 or so years old.

 

Might sound silly but have you just tried fitting them??

Yeap i have, it's the support behind the spokes ( the six spokes ) that touch my capliper, i need around 3 or 5mm. The rear sit perfectly its just the front that is :headspin: .

I got the whole set for a G, jus found out the tyres alone on them worth more that a G but it's not just that, i really like it therefore i've tried at a lot of places inclued one Engineer place to see what they can do but it seem like there are no lucks guy so it might have to go on the for sale section.

It seem like spacer is the last option that i have. Anyone here have/experience spacers please pm me or anyone know WHERE TO GET THEM.

Not happy Jane. :mad::(:mad:

It can never be for a Rex because it's 17/ 91/2 at the back and 17/ 81/2 at the front.

The offset has nothing to do with the size of the rim. Where you are right is the fact that the PCD of your Volks would not fit a Subaru. Subaru generally have a PCD of 5x100 which I failed to pick up on... However, Lenso agree with me on the offset :mad:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The spray cans were in the "Kiln" room whilst I was preping the parts,  so probably around 2 hours to get them warmed up, the kiln room has 3 small ovens running at 100°c, 3 medium sized ovens running 100°c, and the large one I used running at 80°c, the room itself was about 28°c, I also spent a bit of time taping up the parts in the room as well, and by the time I was done I would assume that the parts were around that 28°c As for power, I expect a couple of Killerwasps up high would be achievable with the current mods, I'm still running the MZR 2.0 intake and throttle body, and there is a slight mismatch with the 2.0 intake (smaller) and 2.5 intake ports (larger) on the head, this intake is matched and specifically designed to fix this issue with the ports mismatch, the throttle body is also a couple of mm larger, OEM is 65mm, the Bosch is 68mm In the end it will look "prettier" than the molded plastic thing that is the OEM MZR 2.0 intake As for the LSD, it's the OEM Torsen which works fine for what I use the car for, plus, basically no maintenance apart from the occasional oil change
    • I was at Tunehouse in Marrickville (great team over there really know their VR's) , and I spotted this Very clean R35.  
    • Mate , I have the same issue right now with the exhaust noise , if you can tell me what your local guy did , I'll talk to my guys and see if they can do the same. Power is good but it just too loud when put it down. 
    • The other trick I've found with wrinkle black is to put the can in hot water for a bit to warm the paint up, and to pre-heat whatever you're painting. It'll be interesting to see if you pick up any power with the intake, following with interest. Got a proper lsd for this?
×
×
  • Create New...