Jump to content
SAU Community

About to buy Nissan with Idle problem. URGENT!!!!

babydndn

By babydndn,
in General Maintenance

 Share

Recommended Posts

babydndn Newbie

babydndn

Posted
Posted

Question, we took Nissan Skyline R33 1993 tubo for a test drive and while stopped the revs moved low and then it stalled. The revs were normall and only run low when we stopped at traffic lights etc.

The sales guy said he knows someone with the same car, and the reason for the revs idleing low is because the car is built with a "rev hunter" and it is normal with skylines. I have never heard of anything like this.

I am unsure about buying the car because it actually stalled on me, could you please give me some advice, URGENT.

benm Grand Master

benm

Posted
Posted
Question, we took Nissan Skyline R33 1993 tubo for a test drive and while stopped the revs moved low and then it stalled.  The revs were normall and only run low when we stopped at traffic lights etc.
Common problem take a read of this thread. I fixed my problem by cleaning my air filter and by cutting the wire that links the fuel pump to the ecu and grounding it. Never stalled since :rofl:

I have also bumped my idle from ~660rpm to 760rpm. I can't remember ever remember my car "hunting" since turning the idle up abit.

Roy Grand Master

Roy

Posted
Posted
its got factory bov and he is asking for $14900what do you reckon guys buy or not

Tell him to remove the rev hunter (whatever that is, its a bullsh1t excuse for we can get it to idle :cheers: ) and get the thing to idle and drive like the factory and you will buy it :)

It could be a crazy re-written Jap ECU, it could be a dirty AFM, couild be idle control valve setting - is the air con on????

It COULD be a stuffed bottom end and the stalling be oil pressure related...dont scoff thats how it all started with my SR20 Pulsar when the dealer said it was just a bit of water in the coil pack as the engine was just detailed...took it back repeatedly, then after 3 months of stalling / idle probs they said it was a stuffed engine...sorry you are out of warranty, "what you been thrashing this car or something" :D

P1E Mentor

P1E

Posted
Posted

Back when I was really, really new to imports a used car salesman convinced me an NA 300ZX was a twin turbo 300ZX. Good thing I didn't buy it and then realise it was a twin turbo at its first service.

But I've learnt a lot since then. The car yard has also moved and changed names. Twice.

rs73 Grand Master

rs73

Posted
Posted

My car came onto the same situation, sometime will stall when coming to a stop at traffic light, and rev would hunt sometime, but sometime ok.

In my car it was a dying fuel pump. You might wanna check the fuel pressure to see if the car's fuel filter is dirty, if not, then could be fuel pump problem. Could be electrical too eg not earthed properly if it got aftermarket one, or maybe check the voltage supply to the fuel pump.

But then again as said above, it could be dirty afm, could be the aac valve or idle control - there's so many parameters that you should taken into account. Just a food for thought.

WazR32GTSt Grand Master

WazR32GTSt

Posted
Posted

don't get it mate...

if its giving this problem at a test drive, imagine what other problems it will give you once you take it home!

there are plenty of skylines around for sale, take a few for a drive

and stay away from dealerships! dodgy as all shit...

good luck!

Waz.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...