Jump to content
SAU Community

Recommended Posts

Gday guys n girls

Not sure if this belongs in here, but i'm after specific Perth info.

I am waiting on my 89 GTR to come accross from Japan and am in the process of organising customs/insurance/compliance etc etc.

What I am after is feedback/info/recommendations on workshops that could do compliance on 89 GTRs, preferably workshops that have done this model before. Any info is appreciated....costs/reputation/workmanship etc etc.

I have contacted the 3 workshops recommended by Prestige, but I like to research stuff as much as possible :-)

Thanks heaps!

Mat

Link to comment
https://www.sau.com.au/forums/topic/50602-compliance-workshops-89-gtr/
Share on other sites

Cheers dude, I had thought of doing it myself as nothing on the list does look that hard (except maybe the side intrusion bars).

The way my job is though I just dont think I would have the time/patience to get it done myself over a couple weekends. Its a toss up between having the money or having the time/effort and I'd rather pay someone and get it done quick...

My days of turning a spanner are (hopefully) over.

Cheers for the input though, its all appreciated :cheers:

Mat

My mate and I complied an 1988 model Silvia under the 15 year rule requirements back in October last year

To get it over the pits, we:

1). Didn't have to put side intrusion bars in; asked about it and they said it wasn't required.

2). The fuel filler restrictor we got from a Jap shop in Maddington. Removed the fuel pipe (leading into the tank) and took it to Ian diffen who put it onto a pipe enlarger. Then we placed the filler restrictor into the pipe with fuel resistant silicone. (Or can find the pipe from a wreck). ~$15

3). Child restraignts had to be mounted directly behind (or 5cm either side of) the rear seats; 2 of them. Bolt them into the parcel shelf. Can buy from Bentley Garage or any workshop. (Or again from a wreck) - ~$5

4). The drivers side mirror was changed with a flat mirror; find one on a wreck. ~$5

5). High-mount stop light, buy from any automotive accessories shop. ~$20

6). Immobilisor, phone up anyone to come to your house (so you don't have to get a permit), and get them to install one on the spot. ~$109

7). The tyres from Japan were acceptable; they weren't required to be DOT approved, so no cost.

Most of the stuff on that list we got for free, so cost even less. We were quoted by a well known local workshop $1500 to get it complied (= the stuff listed above).

Welcome to 2004, side intrusion bars now compulsory. though gtr may already have them standard.

Though to answer the question, A and B autos in bayswater, bently garage, autoworx in gnangara could all do the work, i couldnt comment on the quality of work though.

Yeah, 89 GTRs dont have side intrusion bars, they def need to be fitted.

There's been plenty of rule changes since Oct03, most notably you now require an engineer/RAWS to sign off on roadworthiness and compliance mods. Also, the areas that need mods are different from model to model, so mods needed for a GTR may be different than a Silvia, 300zx, RX7 etc and vice versa.

Thanks for the input guys, all opinions/experiences are good to hear!

Mat

Oh well doesn't matter anyway.

The point I was making is how little it cost to get the car done compared to what a workshop wanted .... in October 2003.

Was merely trying to save a fellow skyliner a couple of $$

If it's all changed now then so be it.

John Cullen on 0415618326 and his email [email protected] knows a lot about complying 15 year old cars as that is all he does.

It is a lot of work to know but it isnt that expencive.

This is what they look into with each 15 year old car, get somebody who has done a lot and they know what they are doing.

All questions to be completed by an approved signatory. COMPLIANCE (mark with X)

ADR 1/00 REVERSING SIGNAL LAMPS Effective date July 1988

ADR 2/00 Door Latches and Hinges Effective date July 1988

ADR 3/00 - SEATS AND SEAT ANCHORAGES

Effective date July 1988

ADR 4/00 - SEATBELTS

Effective date July 1988

ADR 5 00 – ANCHORAGES FOR SEATBELTS

Effective date July 1988

ADR 6/00 Direction turn Signals Lamps

Effective date October 1988

ADR 7/00 - HYDRAULIC BRAKE HOSES

Effective date July 1988

ADR 8/00 Safety Glazing Material

Effective date July 1988

ADR 10/00 - STEERING COLUMN

Effective date July 1988

ADR 11/00 – INTERNAL SUN VISORS

Effective date July 1988

ADR 12/00 - GLARE REDUCTION IN THE FIELD OF VIEW

Effective date July 1988

ADR 13/00 - INSTALLATION OF LIGHTS & LIGHT SIGNALLING DEVICES

Effective date Sept 1991

ADR 14/00 - REAR VISION MIRROR

Effective date July 1988

ADR 15/00- DEMISTING OF WINDSCREEN

Effective date July 1988

ADR 16/00 - WINDSCREEN WIPERS & WASHERS

Effective date July 1988

ADR 18/00 – INSTRUMENTATION

Effective date July 1988

ADR 21/00 - INSTRUMENT PANEL

Effective date July 1988

ADR 22/00 - HEAD RESTRAINTS

Effective date July 1988

ADR 24/00 - TYRE AND RIM SELECTION

Effective date July 1988

ADR 25/00 - ANTI-THEFT LOCK

Effective date July 1988

ADR 28/00 - EXTERNAL NOISE OF MOTOR VEHICLES

Effective date July 1988

ADR 29/00 - SIDE DOOR STRENGTH

Effective date July 1988

ADR 30/00 - SMOKE EMISSION CONTROL FOR DIESEL VEHICLES

Effective date July 1988

ADR 31/00 - PASSENGER CAR BRAKES (MA Category Only)

Effective date July 1988

ADR 34/00 - CHILD RESTRAINT ANCHORAGES & CHILD RESTRAINT

Effective date July 1988

ADR 35/00 - COMMERCIAL VEHICLE BRAKE SYSTEMS (MB & MC CATEGORY)

Effective date July 1988

ADR 37/00 - EMISSION CONTROL FOR LIGHT VEHICLES

Effective date July 1988

ADR 41/00 - MANDATORY OPERATION ON UNLEADED PETROL

Effective date July 1988

ADR 42/00 - GENERAL SAFETY REQUIREMENTS

Effective date July 1988

ADR 43, 43/01 - VEHICLE CONFIGURATION & MARKING

Effective date July 1988

ADR 60/00 - CENTRE HIGH MOUNTED STOP LAMPS

Effective date July 1989 MA category

thanx for that but would he have the time to sit there and explain to me what needs to be done?

any doco's on the web showing the detials? or even a simple list? dot website maybe?

steve

Email me your personal email address and I will send you the check list they have to get tne enginner to sign off.

Tryied to post it but to big.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...