Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Ever heard the saying that a $2 part always caused the problem? :D

5000km is alot for a high strung engine, so you are better off spending the extra $5 for filters like ryco rather than have to spend $2000 on an engine rebuild after using cheap filters and oil

just because its more expensive doesn't mean its any better

you show me conclusive testing results saying that the filter twice the price is better and i will use it...

if you are going to re-oil your fitler then you might also want to get some carby cleaner (i use brake cleaner) to clean your AFM.

after you oil the filter some will travel through and onto the wire in the AFM so a few days after service it wouldn't hurt to give it a spray...

cheers,

Waz.

Do not forget to gap your sprak plugs

the bcpr6es is the model number and 11 is the gap you should gap them to 1.1 mm but on a turbo car you might go down to .8 depingding on boost..

They used to come pre gapped to 1.1 now you have to set the gap yourself

Would a 0.8mm gap on regular copper plugs in a stock engine be alright?

hey adam,

if you're running stock boost then i would stick with the 1.1mm gap for better combustion

from what i understand, 0.8mm gaps are for when the boost is turned up over stock levels

the way i see it if small gaps did nothing at all bad then all plugs would be gapped down to 0.5mm or so. the smaller the gap eventually must do something (i have heard that the larger the gap the better the fuel ignites and it combusts more efficiently or something).

moral of the story (in my opinion): run as big a gap as your engine will allow without missing :)

cheers,

Warren.

Thanks Waz just one more thing, can having the gap too small do any damage?

dunno

have heard that you can get pinging but have not had any first-hand experience so not 100% sure

i have a theory that if you gap it too small then you will begin to lose some power but as i said jsut atheory

INASNT - wow didn't realise the fuel filter was so cheap! wil get onto that myself!

cheers,

Waz.

If the gap is too small it will sound like marbles are rolling around in the engine (i.e a few cylinders wont fire). You will notice this as soon as the car is started.

If you have an exhaust the boost usually creeps up a few PSI so gapping to 0.9-0.8 could be an idea.

Ryco Fuel filters are around $20-25 from kmart for a Z200 - Z201/Z202 [bigger] I bought one about 12 months ago and will be replacing soon, I think the box said 15,000kms or 12 months [whichever comes first].

I dont know where you can get RYCO for $12 Denham?

Ryco Fuel filters are around $20-25 from kmart for a Z200 - Z201/Z202 [bigger] I bought one about 12 months ago and will be replacing soon, I think the box said 15,000kms or 12 months [whichever comes first].

 

I dont know where you can get RYCO for $12 Denham?

See attached photo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...