Jump to content
SAU Community

Recommended Posts

ill sell him a good RB25DE engine and gearbox with heavy duty clutch, for 500, normally u would be looking at close to that just for a gearbox, but i really need to get rid of this engine its taking up space.

R32 box is worth around $500.

The R32 box is not weak at all.

Sure it may not handle 200+rwkw and a set of slicks but what aussy cars will? ;)

For a set of normal tyres the box's have been known to hold up to 250rwkw providing you engage the gear properly before powering on (no flatchanges)

My R32 box has done just under 100,000km's of my driving and lots of flat changes in to second and third. Its held 160rwkw with no issues. Total the box has done 165,000kms.

They are good. Get a RB20 box and with the na it won't break, even with a mild RB20DET it won't break easy.

R32 box is worth around $500.

 

The R32 box is not weak at all.

 

Sure it may not handle 200+rwkw and a set of slicks but what aussy cars will? :)

 

For a set of normal tyres the box's have been known to hold up to 250rwkw providing you engage the gear properly before powering on (no flatchanges)

 

My R32 box has done just under 100,000km's of my driving and lots of flat changes in to second and third. Its held 160rwkw with no issues. Total the box has done 165,000kms.

 

They are good. Get a RB20 box and with the na it won't break, even with a mild RB20DET it won't break easy.

Joels right, they are tough, just that the RB25 box is tougher again!

For constant clutch dumps (eg drags or drift) they are know to break, for normal driving they are pretty tough

Mine is still going good after 140,000kms, after a stint with semi-race tyres and a trip to the drags, my diff has died but the gearbox still seems good

The r32 box is weak as I went through a couple with 180rwkw

best off converting to r33 box

as for aussie cars that will handle 200+rwkw are you kidding

Vl turbo, ss commodore etc

R32 box is worth around $500.

 

The R32 box is not weak at all.

 

Sure it may not handle 200+rwkw and a set of slicks but what aussy cars will? :cheers:

 

For a set of normal tyres the box's have been known to hold up to 250rwkw providing you engage the gear properly before powering on (no flatchanges)

 

My R32 box has done just under 100,000km's of my driving and lots of flat changes in to second and third. Its held 160rwkw with no issues. Total the box has done 165,000kms.

 

They are good. Get a RB20 box and with the na it won't break, even with a mild RB20DET it won't break easy.

I wouldn't expect a 32 geabox to cope with the extra torque of a RB25T, so I guess thats why they failed

Behaind a N/A RB25, like the dude was enquiring about, it should be fine

i know its a little bit off topic, but thought its basically under the same category. But how strong are 5 speed manaul gearboxes from a rb25de?, i'd be looking to use it for rb25det or rb30det.

From what I have picked up, they are basically the same as a RB20DET box

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...